I mean all Horizantal TPs (below and above 12000) do not show any signal while scanning. I made all FEC values "Auto" 118.8 is connected to Port 4 of DPP44. What are the settings I need to use for "Diseqc Switch Type" and Ports? I picked "v1.0/2.0 Diseqc Switch" and added 118. satellite to Port 4.

I made all the changes. The scan shows no signal on transponder frequencies less than 12050 and all Horizantal.

My transponder file has only 9 trsnponders because, I deleted the rest.

Any ideas?

TIA!

Thanks for the replies! I am still not able to scan 118.7 using the following settings: LOF Settings: LNB Type: NA Bandstacked Ku-Hi (DBS) Lof-1: 10750000 Lof-2: 13850000 Raw Diseqc: 22 KHz: Controlled by LOF-SW Uncommitted: Disabled The transponder file I am using is: [SATTYPE] 1=2413 2=Anik F3 118...

I think I have the correct LNBs because I can receive some of the channels using DN reciever (subscription).

I am not able to scan 118.7. I have DishPro 500+ with DP44 switch.

Can someone tell what settings do i need to use for the LNB type, LOF, Diseqc etc.?