DvbDream Community

Please add your tests with your devices, under this post in the following format. So we can track them down and fix the problems etc. Also it will be a nice reference for other users. You can always edit your posts.

Test Environment: DVB Dream version, Driver version, Windows OS Version, Your Nickname or Name, Test Date
Manufacturer: company name
Model: model name / number
Type: device type (USB/PCI/PCI-Express) , tuner type (Satellite/Terrestrial/Cable)
Supports DVB-S2/T2/C2: Yes/No/No hardware support (if the card supports new modulations, i.e. 8psk, you can add also short info here)
Diseqc switch works?: Yes/No/No hardware support (and short info , if partially supported)
Diseqc motor/raw diseqc works?: Yes/No/No hardware support (this is in fact the raw diseqc support, only if you have motor/positioner or a raw diseqc device to test with please add this line, please also specify which raw diseqc device you use, i.e. motor or switch model&type)
RC works?: Yes/No/No hardware support (remote control works or not?)
CI works?: Yes/No/No hardware support (add this line if only your device hardware supports CI/CAMs)
Notes: Description of your experience with this card on DD

Example in the following post.

_________________
DVB Dream - because I have to dream about having time to code it

Test Environment: DVB Dream v1.7a, TBS BDA driver version 1.0.2.2 (14.12.2011), Windows 7 Ultimate 64bit, by Rel, 20.12.2011
Manufacturer: TBS
Model: QBox CI (TBS 5980 CI)
Type: USB, Satellite
Supports DVB-S2: Yes
Diseqc switch works?: Yes
Diseqc motor/raw diseqc works?: Yes
RC works?: Yes
CI works?: Yes (needs TBS CI module which is written by TBS)
Notes: Device works well without any problems

_________________
DVB Dream - because I have to dream about having time to code it

Test Environment: DVB Dream v1.7a, TBS BDA driver version 1.0.2.2 (14.12.2011), Windows XP 32 BIT and Windows 7 , 64 BIT by Snuffer, 20.12.2011
Manufacturer: Proftuners
Model: 7300,7301 and 8000
Type: PCI, Satellite
Supports DVB-S2
Diseqc switch works?: Yes
Diseqc motor/raw diseqc works?: Yes
RC works?: Not in Use at my station
CI works?: Not in Use at my station
Notes: Device works well without any problems

Test Environment: DVB Dream v1.5g, Windows 7 , 64 BIT , 20.12.2011
Manufacturer: Proftuners
Model: ,7301
Type: PCI, Satellite
Supports DVB-S2
Diseqc switch works?: do niot use
Diseqc motor/raw diseqc works?: do not use
RC works?: Not in Use at my station
CI works?: Not in Use at my station
Notes: Device works well without any problems

_________________
Prof 7300 BDA

Test Environment: DVB Dream v1.7, Windows 7 Pro, 32 BIT
Manufacturer: Genpix
Model: USB Adapter Rev2
Type: USB
Supports T8PSK
Diseqc switch works?: Yes
Diseqc motor/raw diseqc works?: Yes
RC works?: Twinhan, Yes
CI works?: Not in Use at my station
Notes: Device works well without any problems

_________________
TH102G/Genpix USB

Test Environment: DVB Dream 1.7a p2, 4.6.0, Windows 7 64bit HP, chrums, 23.11-25.12.2011
Manufacturer: technisat
Model: skystar s2
Type: PCI/Satellite
Supports DVB-S2/T2/C2: dvb-s, dvb-s2
Diseqc switch works?: Yes
Diseqc motor/raw diseqc works?: not tested
RC works?: Yes (usb dongle)
CI works?: -
Notes: works well

Test Environment: DVB Dream 1.7a p2, bda 1.0.3.8, Windows 7 64bit HP, chrums, 24.12-25.12.2011
Manufacturer: technotrend
Model: tt-connect S2-3600
Type: USB/Satellite
Supports DVB-S2/T2/C2: dvb-s, dvb-s2
Diseqc switch works?: Yes
Diseqc motor/raw diseqc works?: not tested
RC works?: Yes (module tt remote)
CI works?: -
Notes: tested for short, works a little slow (switching channels), you must turn signal indicator

Test Environment: DVB Dream 1.7a p2, bda 1.0.3.8, Windows 7 64bit HP, chrums, 24.12-25.12.2011
Manufacturer: technotrend
Model: tt-connect S2-3650 ci
Type: USB/Satellite
Supports DVB-S2/T2/C2: dvb-s, dvb-s2
Diseqc switch works?: Yes
Diseqc motor/raw diseqc works?: not tested
RC works?: Yes (module tt remote)
CI works?: No!
Notes: tested for short, works a little slow (switching channels), you must turn signal indicator

_________________
- SkyStar S2, tt3600, tt3650, tt2400
- Xeon 3440
- Asus P7P55D-E
- 8GB ram
- 470GTX
- Win XP sp2 and W7 64bit HP

Test Environment: DVB Dream v1.7d (upcoming version), TT BDA driver version 5.0.1.8 (16.01.2009), Windows 7 Ultimate 64bit, by Rel, 15.04.2012
Manufacturer: TechnoTrend
Model: TechnoTrend 3200 (TT-budget S2-3200)
Type: PCI, Satellite
Supports DVB-S2: Yes (tested OK with both NBC-QPSK and 8PSK)
Diseqc switch works?: Yes
Diseqc motor/raw diseqc works?: Yes (not tested but pretty sure it should work since raw commands are supported)
RC works?: Yes
CI works?: Yes (it recognized a "Magic CAM" but couldn't recognize "Zeta CAM", I didn't have subscription card to test decryption, but just checked the CAM menu fine)
Notes: Device works well without any problems (TT driver doesn't seem to support all CA modules out there)

_________________
DVB Dream - because I have to dream about having time to code it

Test Environment: DVB Dream v1.7d (upcoming version), TeVii driver version 4.5.0.0 (21.04.2010), Windows 7 Ultimate 64bit, by Rel, 16.04.2012
Manufacturer: TeVii Technology Ltd.
Model: TeVii S660 DVB-S2
Type: USB, Satellite
Supports DVB-S2: Yes (tested OK with both NBC-QPSK and 8PSK)
Diseqc switch works?: Yes (see the notes)
Diseqc motor/raw diseqc works?: Yes (not tested but pretty sure it should work since raw commands are supported)
RC works?: Yes
CI works?: Device doesn't have CI
Notes: Diseqc switching seems to be a glitchy whatever I try, I couldn't fix it, You can try both DD Standard BDA interface or special Tevii interface which usess TeVii.dll to test it. (Second one will only work for satellite)



Test Environment: DVB Dream v1.7d (upcoming version), TeVii driver version 4.5.0.0 (21.04.2010), Windows 7 Ultimate 64bit, by Rel, 16.04.2012
Manufacturer: TeVii Technology Ltd.
Model: TeVii S630
Type: USB, Satellite
Supports DVB-S2: Not supported by hardware
Diseqc switch works?: Yes (see the notes)
Diseqc motor/raw diseqc works?: Yes (not tested but pretty sure it should work since raw commands are supported)
RC works?: Yes
CI works?: Device doesn't have CI
Notes: Diseqc switching seems to be a glitchy whatever I try, I couldn't fix it, You can try both DD Standard BDA interface or special Tevii interface which usess TeVii.dll to test it. (Second one will only work for satellite)

_________________
DVB Dream - because I have to dream about having time to code it

Test Environment: DVB Dream v1.7d (upcoming version), TechniSat BDA driver version 1.1.1.502 (02.07.2009), Windows 7 Ultimate 64bit, by Rel, 28.04.2012
Manufacturer: Technisat
Model: Technisat SkyStar HD2
Type: PCI, Satellite
Supports DVB-S2: Yes (tested OK with both NBC-QPSK and 8PSK)
Diseqc switch works?: Yes
Diseqc motor/raw diseqc works?: Yes (not tested but pretty sure it should work since raw commands are supported)
RC works?: works in Twinhan mode (tested by Dreamer)
CI works?: No (It doesn't provide any friendly and working SDK/examples to implement this, if you think you can implement we'll share the device interface's source code with you)
Notes: Device works well without any problems (except that CAM doesn't work)

_________________
DVB Dream - because I have to dream about having time to code it

Test Environment: DVB Dream 1.7A p2, TechniSat BDA driver version 2.7.0 (11.04.2011), Windows 7 Ultimate 32bit, dancenow, 31.05.2012
Manufacturer: Technisat
Model: Technisat SkyStar 2 eXpress HD
Type: PCI-Express, Satellite
Supports DVB-S2: Yes
Diseqc switch works?: Yes (tripping slow transition)
Diseqc motor/raw diseqc works?: not tested
RC works?: Yes
CI works?: not tested
Notes: Channel scanner: tripping slow transition

Hi ı have an geniatech HDstar tuner box ı downloaded dvbdream 1.7a but but there is no way start the device ı try evryway and device dont work there is applicatian explain works fine on geniatech i confised would you help me

Test Environment: DVB Dream 1.7a p2, BDA v2.7.0, Windows 7 x64 SP1, DVBDreamPersia, 08/05/2012
Manufacturer: TBS
Model: TBS 8922
Type: PCI , Satellite
Supports DVB-S2/T2/C2: Yes
Diseqc switch works?: Yes
Diseqc motor/raw diseqc works?: Not tested
RC works?: Yes
CI works?: No hardware support
Notes: the only problem is 5-second delay while switching channels between different satellites

WDM Driver??
Don't work here..
Help please.

_________________
Skystar HD2 @ Win7 x64
TerraTec Cinergy S2 PCI HD @ Vista x64

Test Environment: DVB Dream v2.2b, IT9130 BDA Driver 11.4.26.1, Windows Vista Home Premium 32 bit, by Dreamer, 12.10.2012
Manufacturer: Evolve
Model: HD DVB-T USB tuner EVOLVE Mars
Type: USB, Terrestrial
Supports DVB-T/T2: Yes, No
RC works?: Yes
Notes: Device works unstable, one day it works good, the other day it doesn't work and require full reinstall of drivers on Windows Vista, it freezes while installation. It works quite stable on Windows XP while testing few days. Tuner sensitivity is weak, remote control is almost unusable, it works from about 1m from sensor. I do not recommend this tuner.

_________________
Dreamer

Test Environment: DVB Dream v2.2b, AVerMedia H777 Hybrid DVB-T driver version 1.1.0.35, driver date 4.11.2008, Windows Vista Home Premium 32 bit, by Dreamer, 28.11.2012
Manufacturer: AVerMedia
Model: AVerTV Ultra PCI-E RDS
Type: PCI-Express, Terrestrial
Supports DVB-T/T2: Yes, No
RC works?: No
Notes: Device works well - DVB-T tuner. Remote control doesn't work in DD. Analog tuner and FM radio don't work in DD (it has no support for it). Driver installation is quick and easy. Tuner sensitivity is quite high (unlike the other USB DVB-T tuners). Tuner works well together with the Skystar HD2 in the same PC. Multi-recording, PIP and scheduler work well too.

_________________
Dreamer