Cannot scan with dvbdream

General discussion . (Do not post bug reports or feature requests in this section!)

Moderators:Dreamer, FredB, X05

dm-_bobjr
Posts:2
Joined:Wed Nov 14, 2007 7:52 pm
Cannot scan with dvbdream

Postby dm-_bobjr » Wed Nov 14, 2007 8:14 pm

I am having trouble scanning with dvbdream. I have the BDA drivers installed for my twinhan 1020a. When ever I go to scan, the computer freezes and I have to restart. I have tried scanman's bda driver, but I have not had success with that. Whenever I go to scan, it starts for a brief second, then I get the infamous blue screen and the computer restarts. Any help on how to get around this would be greatly appreciated. Thanks

Twinhan 1020a, gefroce 6600 gt, windows vista 32 bit.
User avatar
GrEaTwArRiOr
Just can't stay away
Posts:34
Joined:Wed Jan 17, 2007 6:25 am

Postby GrEaTwArRiOr » Thu Nov 15, 2007 7:02 am

mate don't use bda driver use Twinhan WDM driver it comes with your card CD...

i hope its help

regards,
Gr
TheKrell
Home away from home
Posts:65
Joined:Wed Aug 08, 2007 1:30 pm
Location:Fairfax, VA

Postby TheKrell » Thu Nov 15, 2007 11:13 am

DD 1.4 scans nicely with my 1025 using the Twinhan BDA v.1.2.3.8 (2006. 05) drivers. I believe this is the same driver as your card uses.

I tried the WDM driver once on DD 1.3c, but I don't remember what happened. (Whatever it did, it wasn't better than the 1.2.3.8 driver!) I definitely went back to the BDA driver.

I had the same experience as you using ScanMan's BDA interface, except I didn't get a blue screen. Just the POST all of a sudden.
Twinhan 1025 DishPro LNB DP34 switch Echostar satellites at 119, 110, 61.5
dm-_bobjr
Posts:2
Joined:Wed Nov 14, 2007 7:52 pm

Postby dm-_bobjr » Thu Nov 15, 2007 5:03 pm

I did the above things and I encounter the other problem I am having. Just for reference, I have the device as the twinhan direct device. I set the lnb to na legacy at 11250000. I go to manual scan and scan 12239 Mhz on echo 7. I get 67% signal and 98% quality. However, the scan will detect no channels. When I do an automatic scan, I get signal, but no channels. Any thoughts?
Twinhan 1020a, gefroce 6600 gt, windows vista 32 bit.
dizzymon
Just popping in
Posts:8
Joined:Tue Nov 13, 2007 9:45 am

Postby dizzymon » Fri Nov 16, 2007 4:01 pm

I did the above things and I encounter the other problem I am having. Just for reference, I have the device as the twinhan direct device. I set the lnb to na legacy at 11250000. I go to manual scan and scan 12239 Mhz on echo 7. I get 67% signal and 98% quality. However, the scan will detect no channels. When I do an automatic scan, I get signal, but no channels. Any thoughts?
Reinstall your drivers for your dvb-s card.
Shuttle XPC SS56L /XP Pro SP2 - P4 2.4GHz Celeron 1GB Ram - 128mb Nvidia FX5500 - Pure nVidia/nVidia/Intervideo - DD v1.4d - SS2 v4.4.1 - DVI to HDMI

Return to “General”

Who is online

Users browsing this forum: No registered users and 1 guest