Page 3 of 3
Re: Adding DVB-T AUS?
Posted: Sat Oct 17, 2009 9:07 am
by vini
Hello, I might be too tired to think straight right now, but I have gone through all the menus in DVB Dream, and can't find a way to add a new transponder. The program has no problems reading my device, the only issue I have is not being able to scan for digital channels in Australia.
main menu->options->transponders
or you can edit the file 4000.ini (for DVB-T) with a text editor
Does dvbdream work with the DVB-T frequencies that are used here in Australia? I was having a look around and it seems that Australia uses 64 QAM which seems not to be supported by dvbdream.
SBS and ABC use the following "8 k, 64 QAM, 2/3 FEC, 1/8 GI for the SBS and 8 k, 64 QAM, 3/4 FEC, 1/16 GI for the ABC, both 7 MHz." I am not sure if this is not supported by the software or if that is me not being able to configure the dvbdream correctly.
Is anything able to shed some light on this?
Thanks
Vini
Posted: Thu Mar 10, 2011 2:49 pm
by zamar25
Please explain, how DVBDream Positioner Setup interface needs to be used. In particular, when to press Recalculate, Save, Apply, Send, and other buttons with similar functionality?
Windows Media Center 7
Posted: Sat Apr 09, 2011 2:32 pm
by ghope5
I am using DVB Dream 1.5 on windows 7 home premium 64 bit I have tuned in some channels and they work fine with DVB dream, my question is, is it possible to tune in these channels using Win media Center and playing them through this medium, I have tryied to now avail. The media Center downloads the channels that work with DVB Dream but in MC these channels are locked, is there any switch that unlocks them. Has anybody been able to get programing to work in Mc. my Tuner is a Genpix skywalker 1, the quality is perfect with DVB dream but I would like to be able to record and use the win media remote.
Posted: Sat Oct 08, 2011 2:23 am
by yang_man2006
Please I want to ask a question
Why the program does not support diseqc
the program is very nice, but I have more than the moon and I want to run diseqc but I can't because the program does not support diseqc I hope to solve the problem
Thanks
Posted: Sat Oct 08, 2011 3:57 am
by rel
Please I want to ask a question
Why the program does not support diseqc
the program is very nice, but I have more than the moon and I want to run diseqc but I can't because the program does not support diseqc I hope to solve the problem
Thanks
read:
http://www.dvbdream.org/supported_devices.php
Posted: Sun Oct 09, 2011 12:46 pm
by yang_man2006
DVB Dream is the best programs that I love. but there is a big problem that It doesn't support diseqc
I have Cart Twinhan azure wave 1027 and I have more than one satellite and I can't activate diseqc in the program. Is there a solution
Posted: Tue Oct 11, 2011 2:49 pm
by Dreamer
If you mean diseqc switch, then try Scanman's device, if motor, it doesn't work here yet - with SS2 and SS HD2.
Re: Frequently Asked Questions (FAQ)
Posted: Fri Feb 17, 2012 3:48 am
by Ayam07
Halo....
How to disable snapshot sound or change that sound ?
Re:
Posted: Fri Jul 18, 2014 4:42 am
by playboy
Please I want to ask a question
Why the program does not support diseqc
the program is very nice, but I have more than the moon and I want to run diseqc but I can't because the program does not support diseqc I hope to solve the problem
Thanks
read:
http://www.dvbdream.org/supported_devices.php
The same on here with TBS 6925. start the positionierer konsole and enable positionierer the DVBDream are go down with Win7 32bit. What can i do that this works. I must have diseq 1.2 for positionierer.
DVB-Viewer have not Problem with this.