1.4F always crashes on channel change and audio channels

General discussion . (Do not post bug reports or feature requests in this section!)

Moderators: Dreamer, FredB, X05

User avatar
Rockin' Rick
Home away from home
Posts: 64
Joined: Mon Jun 19, 2006 9:50 am
Location: At the keyboard

1.4F always crashes on channel change and audio channels

Postby Rockin' Rick » Sun Dec 09, 2007 8:29 pm

I've been experimenting as we go along with 1.4.

1.4E was a little unstable, crashing sometimes.

1.4F is very very crashy, and always crashes when trying to listen to most audio channels from dishn**.

Tried re-installing.

Twinahn 1020A, WinXP Pro, Dual Athlon 1800, 3 meter C/Ku dish and toroidal Ku dish.
User avatar
rel
relocation
Posts: 2051
Joined: Fri Jun 16, 2006 9:50 am

Postby rel » Sun Dec 09, 2007 11:13 pm

oh something must be wrong? (most likely plugins or codecs?)
v1.4f should be most stable in v1.4x series.
DVB Dream - because I have to dream about having time to code it
TheKrell
Home away from home
Posts: 65
Joined: Wed Aug 08, 2007 1:30 pm
Location: Fairfax, VA

Postby TheKrell » Mon Dec 10, 2007 1:11 am

I am listening to channel 977 right now. :D I have not observed a crash of 1.4f. Some obvious differences between your setup and mine:

Code: Select all

Me You
----------------------
1025 1020a
W2K XP
1 CPU dual
Also, I did not go directly to 1.4f but instead first installed the patch to 1.4e. Let me add that I could not get 1.4f to run at all until I deleted dvbepg.ini. The pop-up informing me that my dvbepg ini file was too old could not be dismissed!
Twinhan 1025 DishPro LNB DP34 switch Echostar satellites at 119, 110, 61.5
User avatar
GrEaTwArRiOr
Just can't stay away
Posts: 34
Joined: Wed Jan 17, 2007 6:25 am

Postby GrEaTwArRiOr » Mon Dec 10, 2007 2:00 am

no way mate i am running my machine 11hrs 36m and still running....there is no single crash :D

i am using some plugin also may be something wrong with your codec it is possible

@Mr rel thanks for your all hard work mate da**, you did it again

:wink:

thanks and regards,
Gr
Twinhan 1020A WDM Driver
Nilesat 101/102 & Atlantic Bird 4 at 7.0°W
Pentium4 3.2Ghz, 1 GB RAM, ATI 256MB Graphic Card, 120GB Sata HD
Snuffer
love DVB Dream!
Posts: 121
Joined: Fri Jun 16, 2006 9:44 pm

Postby Snuffer » Mon Dec 10, 2007 5:04 am

I am running here now for 12 hours and manny channels switch as a feedhunter and NO crashes at all.

I have see that for some audio codes take's longer to have audio on speakers thats all.
User avatar
Rockin' Rick
Home away from home
Posts: 64
Joined: Mon Jun 19, 2006 9:50 am
Location: At the keyboard

Postby Rockin' Rick » Tue Dec 11, 2007 12:09 pm

I don't know. Same codecs and settings I always use.
Double checked.
Reinstalled into new folder.

1.3 ran quite well, would run for days, even weeks with no trouble.
The first few 1.4 releases worked alright.
The last two have been unusable for me.
Maybe it's my hardware arguing with the latest ddsource.
On a video channel it crashes after a few minutes, 6000's audio channels it crashes immediately.
Trying it with no plugins or modules, so far it's better.
But I've just copied everything from one version to the next, works in 1.3 but not 1.4.

Okay, running with no plugins, only module is DVBEPG, same trouble. This time instead of crashing it just closed.

With a plugin, and without any modules, I get an error, but the DD continues to run.
Attachments
Eureka_log.txt
(56.57 KiB) Downloaded 399 times
Twinahn 1020A, WinXP Pro, Dual Athlon 1800, 3 meter C/Ku dish and toroidal Ku dish.
hanzo
Just can't stay away
Posts: 23
Joined: Thu Dec 13, 2007 2:15 am

Postby hanzo » Thu Dec 13, 2007 11:16 am

1.3 ran quite well, would run for days, even weeks with no trouble.
The first few 1.4 releases worked alright.
The last two have been unusable for me.
That's what i noticed too..
skystar2 on winxp here.
Skystar2 4.4.1
dizzymon
Just popping in
Posts: 8
Joined: Tue Nov 13, 2007 9:45 am

1.4d is better for me

Postby dizzymon » Thu Dec 13, 2007 12:06 pm

1.4f gives me dvbepg ini might cause problems and just hangs. When I finally cleared out the INI I can't scan anything so I just reinstalled 1.4d and it works just fine. So is DVBEPG not working at all with 1.4f?
Shuttle XPC SS56L /XP Pro SP2 - P4 2.4GHz Celeron 1GB Ram - 128mb Nvidia FX5500 - Pure nVidia/nVidia/Intervideo - DD v1.4d - SS2 v4.4.1 - DVI to HDMI
User avatar
Rockin' Rick
Home away from home
Posts: 64
Joined: Mon Jun 19, 2006 9:50 am
Location: At the keyboard

Postby Rockin' Rick » Tue Dec 18, 2007 10:16 am

Installed 1.4G on top of F, all good.
Been running for about 10 hours, plugins and modules as I see fit, running DVBEPG, my choice of codecs, no jitter, no losses, a few resets, smooth as glass. Favorite audio channels are working too.

I could not get 1.4F and DVBEPG to play nice no matter what I tried to do.
Twinahn 1020A, WinXP Pro, Dual Athlon 1800, 3 meter C/Ku dish and toroidal Ku dish.
dizzymon
Just popping in
Posts: 8
Joined: Tue Nov 13, 2007 9:45 am

Still no scheduling capability

Postby dizzymon » Thu Dec 27, 2007 11:44 am

I still wish DVBEPG to be able to schedule recordings. Only watch and record now works. :(
Installed 1.4G on top of F, all good.
Been running for about 10 hours, plugins and modules as I see fit, running DVBEPG, my choice of codecs, no jitter, no losses, a few resets, smooth as glass. Favorite audio channels are working too.

I could not get 1.4F and DVBEPG to play nice no matter what I tried to do.
Shuttle XPC SS56L /XP Pro SP2 - P4 2.4GHz Celeron 1GB Ram - 128mb Nvidia FX5500 - Pure nVidia/nVidia/Intervideo - DD v1.4d - SS2 v4.4.1 - DVI to HDMI

Return to “General”

Who is online

Users browsing this forum: Google [Bot] and 1 guest