having signal problems

General discussion . (Do not post bug reports or feature requests in this section!)

Moderators: Dreamer, FredB, X05

Post Reply
spike916
Just popping in
Posts: 3
Joined: Wed Dec 12, 2007 8:21 pm

having signal problems

Postby spike916 » Wed Dec 12, 2007 9:10 pm

As of right now im using MyTheatre with LNBs from 110 and 119. Im trying to get this working. I added the echo star (7) and (8,10). I go to the channel scan and all the bars are red ; ;. I tried going into the manual scan and the 2 bars that are their hit 80%+ and then after the scan they disappear ; ;. something im doing wrong?

Im using Azure Wave. AD - SE200 PCI- ex slot

Pent. D 3.2
1g 6200 ram
250 sata I
Win xp
Top
User avatar
faam
Home away from home
Posts: 53
Joined: Wed Oct 18, 2006 1:06 pm

Re: having signal problems

Postby faam » Thu Dec 13, 2007 5:43 am

As of right now im using MyTheatre with LNBs from 110 and 119. Im trying to get this working. I added the echo star (7) and (8,10). I go to the channel scan and all the bars are red ; ;. I tried going into the manual scan and the 2 bars that are their hit 80%+ and then after the scan they disappear ; ;. something im doing wrong?

Im using Azure Wave. AD - SE200 PCI- ex slot
Concentrate please and send us your Eureka log ".elf" file if you have a crash and if not a detailed description of your system and configuration of dvbdream

Regards
Skystar2,driver4.3.2,Xp sp2,nvidia mx4000 driver v91.93,P4 2.8,512RAM,DD1.4d
Top
User avatar
rel
relocation
Posts: 2051
Joined: Fri Jun 16, 2006 9:50 am

Re: having signal problems

Postby rel » Thu Dec 13, 2007 7:20 am

As of right now im using MyTheatre with LNBs from 110 and 119. Im trying to get this working. I added the echo star (7) and (8,10). I go to the channel scan and all the bars are red ; ;. I tried going into the manual scan and the 2 bars that are their hit 80%+ and then after the scan they disappear ; ;. something im doing wrong? Im using Azure Wave. AD - SE200 PCI- ex slot

AzureWave hasn't been added to supported/tested devices list yet. But you might want to give a try to ScanMan's BDA interface here for better Twinhan support:
http://www.dvbdream.org/forum/viewtopic ... 1&start=15
DVB Dream - because I have to dream about having time to code it
Top
spike916
Just popping in
Posts: 3
Joined: Wed Dec 12, 2007 8:21 pm

Postby spike916 » Mon Dec 17, 2007 2:12 pm

theres no crash or anything just the signal quality and strength show up and disapear. there was no .elf file so ill try again using the link from above.
Pent. D 3.2
1g 6200 ram
250 sata I
Win xp
Top
spike916
Just popping in
Posts: 3
Joined: Wed Dec 12, 2007 8:21 pm

Postby spike916 » Mon Dec 17, 2007 2:12 pm

theres no crash or anything just the signal quality and strength show up and disapear. there was no .elf file so ill try again using the link from above.
Pent. D 3.2
1g 6200 ram
250 sata I
Win xp
Top
KhuongDuy
Posts: 1
Joined: Mon Dec 24, 2007 11:46 pm

Postby KhuongDuy » Wed Dec 26, 2007 6:01 pm

Yeah, I have the same problem, Someone please help. Thank you in advand
Skystar
Top
CausticSoda
Just can't stay away
Posts: 42
Joined: Mon Dec 31, 2007 4:11 pm

Postby CausticSoda » Thu Jan 03, 2008 8:08 pm

I think I am having the same problem with the Twinhan 1027 card. It was working fine (except for diseqc) until I ran the Vista MCE program on the CD. I think it did something to the registry that causes the main drivers to malfunction.

Anybody know what those registry entries were?
Twinhan 1027
Dishpro LNB
Top
Post Reply

Return to “General”

Who is online

Users browsing this forum: No registered users and 1 guest