dvbsbridge

General discussion . (Do not post bug reports or feature requests in this section!)

Moderators: Dreamer, FredB, X05

Post Reply
jtb19nh
Just popping in
Posts: 4
Joined: Fri May 16, 2008 3:19 pm

dvbsbridge

Postby jtb19nh » Thu Dec 11, 2008 9:50 am

does anyone have dvbsbridge working with dream?

nova-s
dishpro500
119/110
Top
jerryt
love DVB Dream!
Posts: 153
Joined: Mon Jun 19, 2006 11:15 am

Postby jerryt » Thu Dec 11, 2008 10:16 am

Yes.
Twinhan 1020a driver 2.4.1.1, Skystar2 2.3 driver 4.4.0, Genpix USB, T90 and SG2100 w QPH-031.
Top
jtb19nh
Just popping in
Posts: 4
Joined: Fri May 16, 2008 3:19 pm

Postby jtb19nh » Thu Dec 11, 2008 10:27 am

i cant seem to get it to work. After i install it i get no signal in dvbdream. There is also no option for disqc. Any ideas as to what i am doing wrong?
nova-s
dishpro500
119/110
Top
jerryt
love DVB Dream!
Posts: 153
Joined: Mon Jun 19, 2006 11:15 am

Postby jerryt » Thu Dec 11, 2008 3:25 pm

You start with Dvbdream setup and working. Install Dvbsbridge and open the Dvbsbridge module and assign channels to index number up to 160.

Then open mediaportal or MC and scan for channels, you should see dvbdream changing channels as the other program (MP or MC) scans.

The beta version (h.264) of dvbsbridge for dvbdream does not scan, so use the release version, scan your channels and then install the beta.
Twinhan 1020a driver 2.4.1.1, Skystar2 2.3 driver 4.4.0, Genpix USB, T90 and SG2100 w QPH-031.
Top
jtb19nh
Just popping in
Posts: 4
Joined: Fri May 16, 2008 3:19 pm

Postby jtb19nh » Thu Dec 11, 2008 4:11 pm

I have dvbdream working. However after i install dvbsbridge and reopen dream then i have no signal what so ever. If i go to devices and change it back to hauppauge then i get my signal back. Any ideas as to why this is happening? There is also no disqc under options, it gets changed to frequency.
nova-s
dishpro500
119/110
Top
jerryt
love DVB Dream!
Posts: 153
Joined: Mon Jun 19, 2006 11:15 am

Postby jerryt » Thu Dec 11, 2008 5:28 pm

I have dvbdream working. However after i install dvbsbridge and reopen dream then i have no signal what so ever. If i go to devices and change it back to hauppauge then i get my signal back. Any ideas as to why this is happening? There is also no disqc under options, it gets changed to frequency.
"Go to devices" Where? in Dvbdream?

"Change it back to Hauppauge" In Dvbdream? Change back from what?
"Frequency" is showing up in Dvbdream?

What folder is dvbsbridge installing it's module in?

I have not had these problems, please post all the specific.....
Twinhan 1020a driver 2.4.1.1, Skystar2 2.3 driver 4.4.0, Genpix USB, T90 and SG2100 w QPH-031.
Top
Post Reply

Return to “General”

Who is online

Users browsing this forum: No registered users and 1 guest