DvbDream Community

Hello,
my suspicion is, that the contents of the transport stream is not the transport stream itself (it would explain the problems with scanning and recorded transport stream size). Rel told me to check next main driver release in 1.4i, so maybe the problem will be solved there (the original driver does not work either).

<speculation>
It is possible, that both drivers manifest different behaviour based on the same problem, there is some tuner interface pin with GUID {D0A67D65-08DF-4FEC-8533-E5B550410B85} ("BDA PID Filter Property Set" ), which I suspect sets the contents of the output stream on the BDA tuner (complete TS packet/PES payloads/PAT, PMT, CAT, Private/gathered TS packet payloads) and coresponding PIDs. Maybe this is also the reason why the device is listed twice?
</speculation>

I am a newbie to DD and just experimenting at this point with it on my first HTPC. I have gotten a GeniaTech USB Satbox and it does work somewhat using the newest version of BDA that came with DD 1.4i. However, my set-up has a Diseqc with 4 satellites hence I can only use the first LNB on the first port (I realize that BDA has no or limited support for Diseqc for some devices ). The scan gave me some channels, but not all (am also using an FTA box). I also tried using Scanman's BDA-ALL latest version and I got the same results.

I am wondering if DD or Scanman have any plans to support a BDA driver with Diseqc capability for the Satbox in the future. Thanks.

scanman what is the best bda_all file to use with a skystar usb plus and disecq...?

Hello!

I have dvb-s2 card "Tevii s460". It wants to see support in dvbdream. At least DiSEqC worked. One can hope for this? Home manufacturer card: http://tevii.com

ps: sorry for bad english, this is computers translation. ;(

Thanks,

This DD driver works with Nebula DigiTV USB, using Nebula's drivers.
Without this DD driver, the DVBDream worked, and could change channels within the pre-tuned multiplex, but could not change frequency/multiplex.

~~~
With this driver, all works fine except no audio on DVB radio stations (they work fine with other software).
~
That turned out not to be radio specifically, but to be one particular multiplex that happened to have lots of radio. It has somehow made itself OK now ~ maybe because I rescanned that multiplex, or ???

~~~

Despite other comments on the thread, I could only find the original download on the German DD forum, and had to register there.
~
Turns out that was because I was not rgistered when I first looked on this site. This can be confusing, as the comment about the downloaded file appeared, but the file itself did not.

Thank ScanMan very much for his BDA_ALL driver, which enabled use of DVB-S2 in DVBDream.
My system:
Omicom SkyStar4 DVB-S2
Dish on Rotor STAB HH 120
2 in 1 diseqc switch Golden-Interstar
multifeed Ku-Linear on LNB1, Ku-Curculiar on LNB2
With this driver BDA_ALL(1.03 to 1.08 ) DVB-S2 work fine, but rotor don't accept any diseqc command, like E0 31 6B 0A and can't positioning dish
Seting DiSEqCMode value to 1,2,3 in bda_all.ini has no result.
Original driver bda.dev work with rotor fine, but it can't tune DVB-S2.
Help me, please.
ps: sorry for bad english...

Log bda_all.log here:
[23:31:55:375] [DEV_INIT]::DEV-version: 01.00.08.01
[23:31:55:375] [DEV_INIT]::Windows-version: XP
[23:31:55:375] [DEV_INIT]::Programm calling: C:\dvbdream\dvbdream.exe
[23:31:55:375] [DEV_INIT]::Collecting device information...
[23:31:55:375] [TBDADevice(@03B92058)->Init]::Enumerate 1 Network-Tuner
[23:31:55:375] [TBDADevice(@03B92058)->Init]::Enumerate 2 Node-Descriptor
[23:31:55:390] [TBDADevice(@03B92058)->Init]::Remove TuningSpace: DC-DVBs
[23:31:55:390] [TBDADevice(@03B92058)->Init]::Create TuningSpace: DC-DVBs
[23:31:55:390] [TBDADevice(@03B92058)->Init]::... Finished
[23:31:55:390] [DEV_INIT]::BDA-Devices found: 1
[23:31:55:390] [DEV_INIT]::Device #0: Omicom SkyStar 4 BDA Tuner/Demod (DVB-S)
[23:31:55:390] [DD-Request]::DeviceGetInterface
[23:31:55:390] [DD-Request]::DeviceGetInterfaceInfo
[23:31:55:390] [DD-Request]::SetCallBack - Pointer: 000000000058FA5C
[23:31:55:390] [DD-Request]::StartDevice - dwDeviceNo from DD: 0
[23:31:55:390] [TBDADevice(@03B92058)->Activate]::Request to Activate the Device
[23:31:55:390] [TBDADevice(@03B92058)->Activate]::DVB-S - Omicom SkyStar 4 BDA Tuner/Demod
[23:31:55:406] [TBDADevice(@03B92058)->Activate]::Capture-Filter: Omicom SkyStar 4 AVStream TS Capture
[23:31:55:406] [TBDADevice(@03B92058)->Activate]::Set TS-CallBack Function
[23:31:55:406] [TBDADevice(@03B92058)->Activate]::Activating succeeded
[23:31:55:406] [TTH_IOCTL(@03B920CC)->TH IOCTL]::THBDA_IOCTL_CHECK_INTERFACE failed
[23:31:55:406] [DD-Request]::GetDeviceInfo
[23:31:55:546] [DD-Request]::SendDiSEqC
[23:31:55:546] [DD-Request]::SendDiSEqC - CMD: E0 10 38 F0 - ToneBurst: 0
[23:31:55:750] [DD-Request]::SendDiSEqC
[23:31:55:750] [DD-Request]::SendDiSEqC - CMD: E0 10 38 F0 - ToneBurst: 0
[23:31:55:953] [DD-Request]::SendDiSEqC
[23:31:55:953] [DD-Request]::SendDiSEqC - CMD: not assigned - ToneBurst: 1
[23:31:56:062] [DD-Request]::CancelTuning
[23:31:56:062] [DD-Request]::SetTuner - TimeOut: 6000ms
[23:31:56:062] [TBDADevice(@03B92058)->TuneRequest]::DVB-S - Frequency: 12597000 SymbolRate: 27500 Polarization: 1
[23:31:56:062] [TBDADevice(@03B92058)->TuneRequest]::Setting up DiSEqC to 0x00000000
[23:31:57:078] [DD-Request]::SetTuner - Successful locked
[23:32:19:500] [DD-Request]::CancelTuning
[23:32:19:500] [DD-Request]::SetTuner - TimeOut: 6000ms
[23:32:19:500] [TBDADevice(@03B92058)->TuneRequest]::DVB-S - Frequency: 12597000 SymbolRate: 27500 Polarization: 1
[23:32:19:500] [TBDADevice(@03B92058)->TuneRequest]::Setting up DiSEqC to 0x00000000
[23:32:19:625] [DD-Request]::SetTuner - Successful locked
[23:32:31:140] [DD-Request]::SendDiSEqC
[23:32:31:140] [DD-Request]::SendDiSEqC - CMD: E0 10 38 F0 - ToneBurst: 0
[23:32:31:343] [DD-Request]::SendDiSEqC
[23:32:31:343] [DD-Request]::SendDiSEqC - CMD: E0 10 38 F0 - ToneBurst: 0
[23:32:31:546] [DD-Request]::SendDiSEqC
[23:32:31:546] [DD-Request]::SendDiSEqC - CMD: not assigned - ToneBurst: 1
[23:32:31:656] [DD-Request]::CancelTuning
[23:32:31:671] [DD-Request]::SetTuner - TimeOut: 6000ms
[23:32:31:671] [TBDADevice(@03B92058)->TuneRequest]::DVB-S - Frequency: 11449000 SymbolRate: 27500 Polarization: 0
[23:32:31:671] [TBDADevice(@03B92058)->TuneRequest]::Setting up DiSEqC to 0x00000000
[23:32:32:531] [DD-Request]::SetTuner - Successful locked
[23:32:39:437] [DD-Request]::SendDiSEqC
[23:32:39:437] [DD-Request]::SendDiSEqC - CMD: E0 10 38 F0 - ToneBurst: 0
[23:32:39:640] [DD-Request]::SendDiSEqC
[23:32:39:640] [DD-Request]::SendDiSEqC - CMD: E0 10 38 F0 - ToneBurst: 0
[23:32:39:843] [DD-Request]::SendDiSEqC
[23:32:39:843] [DD-Request]::SendDiSEqC - CMD: not assigned - ToneBurst: 1
[23:32:39:953] [DD-Request]::CancelTuning
[23:32:39:953] [DD-Request]::SetTuner - TimeOut: 6000ms
[23:32:39:953] [TBDADevice(@03B92058)->TuneRequest]::DVB-S - Frequency: 12597000 SymbolRate: 27500 Polarization: 1
[23:32:39:953] [TBDADevice(@03B92058)->TuneRequest]::Setting up DiSEqC to 0x00000000
[23:32:40:984] [DD-Request]::SetTuner - Successful locked
[23:32:55:468] [DD-Request]::SendDiSEqC
[23:32:55:468] [DD-Request]::SendDiSEqC - CMD: E0 31 6B 0A - ToneBurst: 0
[23:33:02:718] [DD-Request]::SendDiSEqC
[23:33:02:718] [DD-Request]::SendDiSEqC - CMD: E0 31 6B 0A - ToneBurst: 0
[23:33:07:734] [DD-Request]::StopDevice
[23:33:07:734] [TBDADevice(@03B92058)->Stop]::Try to stop FControl
[23:33:07:734] [TBDADevice(@03B92058)->Stop]::Checking Graph...
[23:33:07:734] [TBDADevice(@03B92058)->Stop]::Try to close Graph
[23:33:07:734] [TBDADevice(@03B92058)->Stop]::Try to stop & remove Filter
[23:33:07:734] [TBDADevice(@03B92058)->Stop]::Try to disconnect pins
[23:33:07:734] [TBDADevice(@03B92058)->Stop]::Clear TS-CallBack
[23:33:07:734] [TBDADevice(@03B92058)->Stop]::Unregister Network-Provider
[23:33:07:734] [TBDADevice(@03B92058)->Stop]::... finished
[23:33:07:734] [DEV_EXIT]::...finished

DVB Dream 1.4i p1
TT S2-3200
bda 5.0.0.19

[09/08/08 11:55:55 : ] >> DeviceGetList
[09/08/08 11:55:55 : 15] - Filter [TechnoTrend BDA/DVB-S Tuner]
[09/08/08 11:55:55 : 15] << DeviceGetList
[09/08/08 11:55:55 : 15] StartDevice() dwDeviceNo:0
[09/08/08 11:55:55 : 15] >> DeviceGetList
[09/08/08 11:55:55 : 15] - Filter [TechnoTrend BDA/DVB-S Tuner]
[09/08/08 11:55:55 : 15] << DeviceGetList
[09/08/08 11:55:55 : 15] BDA Device Name: [TechnoTrend BDA/DVB-S Tuner] (Tuner Type:1)
[09/08/08 11:55:55 : 31] TuningSpace Name: 'Cable' NetworkType: {00000000-0000-0000-0000-000000000000}
[09/08/08 11:55:55 : 31] TuningSpace Name: 'Antenna' NetworkType: {00000000-0000-0000-0000-000000000000}
[09/08/08 11:55:55 : 31] TuningSpace Name: 'ATSC' NetworkType: {0DAD2FDD-5FD7-11D3-8F50-00C04F7971E2}
[09/08/08 11:55:55 : 31] TuningSpace Name: 'Digital Cable' NetworkType: {143827AB-F77B-498D-81CA-5A007AEC28BF}
[09/08/08 11:55:55 : 31] TuningSpace Name: 'AuxIn1' NetworkType: {00000000-0000-0000-0000-000000000000}
[09/08/08 11:55:55 : 31] TuningSpace Name: 'FM Radio' NetworkType: {00000000-0000-0000-0000-000000000000}
[09/08/08 11:55:55 : 31] TuningSpace Name: 'DVB-T' NetworkType: {216C62DF-6D7F-4E9A-8571-05F14EDB766A}
[09/08/08 11:55:55 : 31] TuningSpace Name: 'GkDVB-S' NetworkType: {FA4B375A-45B4-4D45-8440-263957B11623}
[09/08/08 11:55:55 : 31] TuningSpace Name: 'GkDVB-C' NetworkType: {DC0C0FE7-0485-4266-B93F-68FBF80ED834}
[09/08/08 11:55:55 : 31] TuningSpace Name: 'GkDVB-T' NetworkType: {216C62DF-6D7F-4E9A-8571-05F14EDB766A}
[09/08/08 11:55:55 : 31] TuningSpace Name: 'DD2 DVB-S' NetworkType: {FA4B375A-45B4-4D45-8440-263957B11623}
[09/08/08 11:55:55 : 31] Enumeration found 11 tuning spaces
[09/08/08 11:55:55 : 31] Found TuningSpace
[09/08/08 11:55:55 : 31] BDACardType: 0
[09/08/08 11:55:55 : 47] GetTunerInterfaces: Pin types (2) :
[09/08/08 11:55:55 : 47] GetTunerInterfaces: Pin 0 Type = 0
[09/08/08 11:55:55 : 47] GetTunerInterfaces: Pin 1 Type = 1
[09/08/08 11:55:55 : 47] GetTunerInterfaces: Node types (2):
[09/08/08 11:55:55 : 47] GetTunerInterfaces: Node 0 Type = 0
[09/08/08 11:55:55 : 47] GetTunerInterfaces: Node 1 Type = 1
[09/08/08 11:55:55 : 47] GetTunerInterfaces: Node interfaces:
[09/08/08 11:55:55 : 47] GetTunerInterfaces: Interfaces on NodeType 0 (3 interfaces):
[09/08/08 11:55:55 : 47] GetTunerInterfaces: {71985F47-1CA1-11D3-9CC8-00C04F7971E0} IID_IBDA_FrequencyFilter
[09/08/08 11:55:55 : 47] GetTunerInterfaces: {1347D106-CF3A-428A-A5CB-AC0D9A2A4338} IID_IBDA_SignalStatistics
[09/08/08 11:55:55 : 47] GetTunerInterfaces: {992CF102-49F9-4719-A664-C4F23E2408F4} IID_IBDA_LNBInfo
[09/08/08 11:55:55 : 47] GetTunerInterfaces: Interfaces on NodeType 1 (1 interfaces):
[09/08/08 11:55:55 : 47] GetTunerInterfaces: {EF30F379-985B-4D10-B640-A79D5E04E1E0} IID_IBDA_DigitalDemodulator
[09/08/08 11:55:59 : 4062] FAILED: cannot connect ms mpeg-2 demultiplexer filter to transport information filter

on screen show window about ERROR 14 and OFF LINE mode

twinhan 1027 driver v 1.0.2.9
dvbdream v1.4i p1 BDA v2.2.0
Does not control motor.
As possible correct?
Excuse me for bad english.

Well now im sratching me head i had agreed with Technisat that my unit was faulty after going thro' all the ideas and tips that they had offered
just dl/installed your drivers package low and behold the F*****g started
so now ive got to play around all over again to see what channels i can get
but hey CHEERS MATE BIG UP

i have 2 pc, same motherboard and same os: vista x64. but while with the first pc i have no problem, with the second i can not receive any frequencies.

i use the bda_all driver with an usb dvb-t receiver by pinnacle.

before i start a new format, anyone can suggest some "tricks" to try? (something to do)
sorry if bad english
thanks

i formatted and i got the same problem.

both pc have same video drivers, same codecs, same processor family.
in the PC that does not work there's also a skystar2 PCI with no problems.

i always used 2 instances, one for dvb-t and other for dvb-s, with xp 32.

but now the dvb-t works only in one pc. please help.

logfile pc that do not works:

edit.....cut


ok solved. was an hardware drivers error.

I have a Twinhan Card (1027) & Diseqc with 4 ports And I use Dvb Dream v.1.4i , it`s working well with Diseqc port No.1 only and the remaining Diseqc ports No.2,3,4 Not Working.(I mean the sat which connected with port No.1 is only Working And the sats which connected with ports No.2,3,4 arenot working ) .
Please , There is a solution for that problem Or any Module solve it, sorry for elongation.

Testing with new Skystar HD2 (Mantis chipset) on XP:
- Can tune DVB-S channels without problems
- Can't tune 8PSK DVB-S2 but 16QAM works fine (8PSK probably needs different modulation type, tried changing INI file, but it gets overwritten with 23 everytime plugin is loaded)
- DisEqC doesn't work.
- Every time plugin is unloaded, I have to kill dream process.

I have been looking in MtsBda.sys with IDA and now have C code to send commands to this card and all others with Mantis chipset. If you are interested, drop me PM. There is about 50 undocumented commands in driver, will make list when I know what they do.

hello all, hello ScanMan
I'm have Skystar HD 2 on windows 7 (previous on vista) with DD 1.4i (tested it too with DD 1.5 beta 7) with all your BDA's from 1.0.5 to 1.1.1( the only i didn't found was the 1.0.9) and the best one working 100% is the 1.0.8, in all the other i found some problems, like DiSEqC problems, DD main window don't close until you click 3 or 4 times and then windows asks you what you want to do and you choose close program.
In vista and win7 i only found problems with the 1.0.8 by searching 3 transponders at astra 19.2 that made DD to crash down, wich i excluded from search and made the search later manualy only from these 3 tranponders with no problems.

Great Job

Regards