EPG for AFN not working.

[Andre]

Hi,

I am using Prof 7500 and DVBDream 2.7

The EPG for AFN not working. Data is in the EIT, but DVBDream is not showing it.

(9°E 11804 V)

Are you going to fix it in the future?

Thank you!

[rel]

I dont have acccess to 9e right now, Can you send me sample data for me to work on ?

How to capture a sample stream
1) Depending on the device you got there, you might first need to enable "Full TS" mode in device options & restart DD
2) start "TSWriter2" (or "Stream Recorder") module (under DD main menu->Modules) on the problematic transponder, record about 100 mb
3) upload file to somewhere (Pcloud, Rapidshare, dropbox, google drive etc). and send links to me

[rel]

Thanks for reporting, I think I've fixed the problem.
just prepared a patch, please test it:

[Andre]

Thank you for the fast fix, it is working fine now!

[Andre]

I did some testing and i have noticed, that epg is only working when the sat got 9,0°E as position.
When the sat got 9,1°E, as i use this position for my second dish, it is not working...

[rel]

ok try this patch, you have a rare condition there Satellite position based workaround is necessary here, so I have added your condition. you can use 0092 or 0089 , 0088 as well if ncessary

[Andre]

Thank you again for the good support.

Yes, my configuration is a bit unusal, i got a Wavefrontier T90 with 14 LNB, a Kathrein 1,8 Meter motorized and a Orbitron SX-8.5 motorized. All switching and positioning works very well with dvbdream.

I now checked the epg fix again and found that:

9,1°E is working in OSD and EPG+
9,0°E is working in OSD but not in EPG+

i know that AFN is on several sats, so maybe to make it working on every sat an other solution is maybe better?