Hauppauge Nova-S-USB2 DiSEqC problem
Posted: Wed Jun 04, 2008 2:49 pm
I also have simmilar problem with DVBviewer Pro 3.9.x (where it only works with LNB2)
So far ONLY DVBviewer GE & Hauppauge own WatchTV v6 work correctly with this card (both sats can be switched at will)
AS per signature 2 sats on a switch.
I can get ONLY channels from LNB1 (Astra 19.2)
On Astra 28.2 I simply have NO signal at all
Resetting hardware makes no difference
It must be something to do with the BDA driver
Thanks
sebus
So far ONLY DVBviewer GE & Hauppauge own WatchTV v6 work correctly with this card (both sats can be switched at will)
AS per signature 2 sats on a switch.
I can get ONLY channels from LNB1 (Astra 19.2)
On Astra 28.2 I simply have NO signal at all
Resetting hardware makes no difference
It must be something to do with the BDA driver
Thanks
sebus