Technisat SkyStar USB 2 HD CI and DVB Dream

Please avoid duplicating bug reports in this section. (search in the previous posts first, if you find any related post, just reply the post to confirm the bug) https://www.dvbdream.org/howtoreportbug.php

Moderators: Dreamer, FredB, X05

pupido
Just popping in
Posts: 3
Joined: Fri Jun 10, 2011 3:19 am

Technisat SkyStar USB 2 HD CI and DVB Dream

Postby pupido » Fri Jun 10, 2011 3:27 am

I wanted to know if Technisat SkyStar USB 2 HD CI working with DVB Dream.
In fact, DVB Dream crashes all the time and I can never close this application.
What can I do to fix this problem?
Thanks,

Mario

P.S.: excuse my english but I speak only Italian

Technisat SkyStar USB 2 HD CI (driver v. 1.3) - Windows Vista 32 bit -
User avatar
rel
relocation
Posts: 2051
Joined: Fri Jun 16, 2006 9:50 am

Postby rel » Fri Jun 10, 2011 8:17 am

you can send your dvbdream.log file and a screenshot if the crash is with an error message.
I would simply say install a new setup to another folder.
It should work with all BDA cards. SkyStar USB 2 HD CI is also a BDA device. but not tested by us.


Please write again if your problem continues

maybe there is a bug, if you tried different codecs and still have the problem. other users should confirm here in that case.
DVB Dream - because I have to dream about having time to code it
pupido
Just popping in
Posts: 3
Joined: Fri Jun 10, 2011 3:19 am

Postby pupido » Fri Jun 10, 2011 5:19 pm

you can send your dvbdream.log file and a screenshot if the crash is with an error message.
I would simply say install a new setup to another folder.
It should work with all BDA cards. SkyStar USB 2 HD CI is also a BDA device. but not tested by us.


Please write again if your problem continues

maybe there is a bug, if you tried different codecs and still have the problem. other users should confirm here in that case.
Can you explain me please do install a new setup to another folder?
Technisat SkyStar USB 2 HD CI (driver v. 1.3) - Windows Vista 32 bit -
User avatar
Dreamer
Moderator
Posts: 1214
Joined: Fri Jun 16, 2006 5:46 pm

Postby Dreamer » Sun Jun 12, 2011 6:25 am

Just start a new installation, run the install file and change the install path, e.g.: instead of \DVB Dream use "\DVB Dream clean".
Dreamer
ozzymanborn
Posts: 1
Joined: Fri Jul 15, 2011 12:35 pm

Postby ozzymanborn » Fri Jul 15, 2011 12:40 pm

I tried trial version of your program and device not started on that > bda.log is above...

[07/15/11 22:31:55 : ] >> DeviceGetList
[07/15/11 22:31:55 : ] - Filter [TechniSat UDST7000BDA DVBS Tuner0]
[07/15/11 22:31:55 : ] << DeviceGetList pDL->Count:1
[07/15/11 22:31:55 : ] StartDevice() dwDeviceNo:0
[07/15/11 22:31:55 : ] >> DeviceGetList
[07/15/11 22:31:55 : ] - Filter [TechniSat UDST7000BDA DVBS Tuner0]
[07/15/11 22:31:55 : ] << DeviceGetList pDL->Count:1
[07/15/11 22:31:55 : 16] BDA Device Name: [TechniSat UDST7000BDA DVBS Tuner0] (Tuner Type:1)
[07/15/11 22:31:55 : 16] add_filter (TechniSat UDST7000BDA DVBS Tuner0)
[07/15/11 22:31:55 : 31] add_filter (Microsoft DVBS Network Provider)
[07/15/11 22:31:55 : 47] TuningSpace Name: 'Antenna' NetworkType: {00000000-0000-0000-0000-000000000000}
[07/15/11 22:31:55 : 47] TuningSpace Name: 'ATSC' NetworkType: {0DAD2FDD-5FD7-11D3-8F50-00C04F7971E2}
[07/15/11 22:31:55 : 47] TuningSpace Name: 'ATSCCable' NetworkType: {0DAD2FDD-5FD7-11D3-8F50-00C04F7971E2}
[07/15/11 22:31:55 : 47] TuningSpace Name: 'AuxIn1' NetworkType: {00000000-0000-0000-0000-000000000000}
[07/15/11 22:31:55 : 47] TuningSpace Name: 'Cable' NetworkType: {00000000-0000-0000-0000-000000000000}
[07/15/11 22:31:55 : 47] TuningSpace Name: 'ClearQAM' NetworkType: {143827AB-F77B-498D-81CA-5A007AEC28BF}
[07/15/11 22:31:55 : 47] TuningSpace Name: 'DD2 DVB-S' NetworkType: {FA4B375A-45B4-4D45-8440-263957B11623}
[07/15/11 22:31:55 : 47] Enumeration found 7 tuning spaces
[07/15/11 22:31:55 : 47] Found TuningSpace
[07/15/11 22:31:55 : 47] ---------------------------------------------
[07/15/11 22:31:55 : 47] BDACardType: 7
[07/15/11 22:31:55 : 47] GetTunerInterfaces: Pin types (2) :
[07/15/11 22:31:55 : 47] GetTunerInterfaces: Pin 0 Type = Input
[07/15/11 22:31:55 : 47] GetTunerInterfaces: Pin 1 Type = Output
[07/15/11 22:31:55 : 47] GetTunerInterfaces: Node types (2):
[07/15/11 22:31:55 : 47] GetTunerInterfaces: Node 0 Type = 0
[07/15/11 22:31:55 : 47] GetTunerInterfaces: Node 1 Type = 1
[07/15/11 22:31:55 : 47] GetTunerInterfaces: Node interfaces:
[07/15/11 22:31:55 : 47] GetTunerInterfaces: Interfaces on NodeType 0 (5 interfaces):
[07/15/11 22:31:55 : 47] GetTunerInterfaces: {992CF102-49F9-4719-A664-C4F23E2408F4} IID_IBDA_LNBInfo
[07/15/11 22:31:55 : 47] GetTunerInterfaces: {71985F47-1CA1-11D3-9CC8-00C04F7971E0} IID_IBDA_FrequencyFilter
[07/15/11 22:31:55 : 47] GetTunerInterfaces: {1347D106-CF3A-428A-A5CB-AC0D9A2A4338} IID_IBDA_SignalStatistics
[07/15/11 22:31:55 : 47] GetTunerInterfaces: {F84E2AB0-3C6B-45E3-A0FC-8669D4B81F11} Unknown Interface
[07/15/11 22:31:55 : 47] GetTunerInterfaces: {E5644CC4-17A1-4EED-BD90-74FDA1D65423} Unknown Interface - QueryInterface FAILED ! - hr = 0x80004002
[07/15/11 22:31:55 : 47] GetTunerInterfaces: Interfaces on NodeType 1 (2 interfaces):
[07/15/11 22:31:55 : 47] GetTunerInterfaces: {EF30F379-985B-4D10-B640-A79D5E04E1E0} IID_IBDA_DigitalDemodulator
[07/15/11 22:31:55 : 47] GetTunerInterfaces: {1347D106-CF3A-428A-A5CB-AC0D9A2A4338} IID_IBDA_SignalStatistics
[07/15/11 22:31:55 : 62] add_filter (TechniSat UDST7000BDA DVBS capture0)
[07/15/11 22:31:55 : 62] SUCCEEDED: Propertyset interface found!
[07/15/11 22:31:55 : 62] add_filter (Sample Grabber)
[07/15/11 22:31:55 : 62] add_filter (MPEG-2 Demultiplexer)
[07/15/11 22:31:55 : 62] add_filter (BDA MPEG0 Transport Information Filter)
[07/15/11 22:31:55 : 78] FAILED: cannot connect ms mpeg-2 demultiplexer filter to transport information filter
[07/15/11 22:31:55 : 78] FAILED: THBDA_IOCTL_STOP_REMOTE_CONTROL failed!
[07/15/11 22:31:55 : 78] BDACleanUp() completed.

And dvbdream.log
15.07.2011 22:31:23 : 359] Captains Log: Star Date 15.07.2011 22:31:23
[15.07.2011 22:31:23 : 359] --------------------------------------------------------
[15.07.2011 22:31:23 : 359] Program started. DvbDream v1.5.6.0
[15.07.2011 22:31:23 : 359] [USER ] ""
[15.07.2011 22:31:23 : 359] [LANG ] english.ini
[15.07.2011 22:31:23 : 359] [DEV ]
[15.07.2011 22:31:23 : 359] [STATS] CHANNELS : Chs:0 FavChs:0 RmtChs:0
[15.07.2011 22:31:23 : 359] [STATS] USAGE : Launchs:0 Usage: 0:0
[15.07.2011 22:31:23 : 359] [STATS] SATS : Sats:0 ()
[15.07.2011 22:31:23 : 359] [SINCE] 1.5.6.0
[15.07.2011 22:31:27 : 4274] [TimeProfiler] Initializing DVB Device: 0 ms
[15.07.2011 22:31:27 : 4274] Loading device:bda.dev
[15.07.2011 22:31:27 : 4383] (ERROR) Cannot Initialize DVB Hardware! Error-Code:14
Technisat USB HD2 CI
windows 7 Ultimate 64bit
nablalap
Just popping in
Posts: 3
Joined: Fri Apr 02, 2010 4:59 am

Postby nablalap » Thu Aug 25, 2011 8:58 am

Version 1.5f has not resolved problems with Skystar Usb 2 HD CI

The bda Device 2.5.8 don't work still well.
Scanning hotbird doesn't find all channels, for example Rai Premium and Rai Storia (Transponder 11804Mhz V 27500 2/3 QPSK).

Console CI/CAM still not take card.

Perhaps could be useful and interesting to insert in DDSDK the project Visual C to compile BDA Devices by yourself.
Attachments
CI-CAM.jpg
CI-CAM.jpg (41.04 KiB) Viewed 12442 times
bda.log
(61.46 KiB) Downloaded 543 times
Skystar USB 2 HD CI
Driver: AzureWaveUsbBda 1.0.8.100 - 08/20/2010
Windows 7 64bit

Return to “Bug Reports”

Who is online

Users browsing this forum: No registered users and 1 guest