DvbDream Community

hi all

sorry for My English is weak

I got Tevii S420 and i used this in windows 7

My problem with last bda i thought this bda will help me and make my Diseqc works on 4 Satellite ,But when the searches for the four satellites and satellite frequencies Izarli one

why

Good night to all the members of DVBDream Community, I have TeVii S-460 card and a DiseqC-switch 1.1 and when I try to search channels, DVBDream finds channels from one satellite only and does not "see" channels from other satellites. I tried to change settings, but it has not helped. Sincerely, Kostan.

Is there any diseqc compatible bda.dev for TechniSat SkyStar USB 2 HD CI devices? My unit working well with the last dba.dev, but the rotor wont move

Is the latest bda.dev able to send uncommitted switch and/or raw DiSEqC commands to a TechnoTrend TT-3200? Both types of commands work fine with a DVB World 2104, but the identical configuration fails with the TechnoTrend.

From bda.log for TT-3200:

SendDiseqc() E0 10 39 F1 Len:4
SendDiseqc without raw diseqc, Diseqc:1

From bda.log for 2104:

SendDiseqc() E0 10 39 F1 Len:4
dvbworld_send_diseqc()

Hi all !

This BDA Interface works with a FloppyDTV S2, I can now scan and watch DVB-S2 channels but only for 8PSK modulation !!?? I cannot scan DVB-S2 QPSK channels (no signal) Impossible to scan channels of Kabel Deutschland on Astra 23.5°E A solution?

But it works fine for my Diseqc 1.1 (uncommitted switch) installation with 8 LNBs.

Good job

Hi all !

This BDA Interface works with a FloppyDTV S2, I can now scan and watch DVB-S2 channels but only for 8PSK modulation !!?? I cannot scan DVB-S2 QPSK channels (no signal) Impossible to scan channels of Kabel Deutschland on Astra 23.5°E A solution?

But it works fine for my Diseqc 1.1 (uncommitted switch) installation with 8 LNBs.

Good job

With the modulation NBC-QPSK (Fec 9/10) it's ok for the scanning of Kabel Deutschland's transponders

Thanx

Prof Revolution DVB-S2 PCI 7301 & USB 7500 Devices require to install Prof's own bda.dev instead of DVBDream bda.dev for these cards to work. Prof support asks to create a folder, where bda.dev files from various card makers can be dropped under their names (like prof.dev) instead of having a single bda.dev file.

Can you incorporate Prof's devices into your bda.dev, or create mentioned bda.dev folder?

thanks

not work good with diseq truman 4 port
and
tevii s460 dvbs-2 card

problem with tevii s460 dvbs-2 and diseq with dvbdream 1.4i
windows 7 x64
the problem
with 4 port diseq truman
1=nilesat
2=hotbird
3=arabsat
when search on hotbird find the same channel on nilesat
when search on arabsat find the same channel on nilesat
diseq not work true
but with myTeVii program work good

Testing BDA 2.5.0 with new Skystar HD2 (Mantis chipset) on XP:
- Can tune DVB-S channels without problems
- Can't tune 8PSK DVB-S2 (tried all modulations in scan dialog) but
16APSK works fine, also can tune NBC-QPSK (tested Sky Deutschland TPX)
- DisEqC doesn't work

I have been looking in MtsBda.sys with IDA and now have C code to send commands to this card and all others with Mantis chipset. If you are interested, drop me PM. There is about 50 undocumented commands in driver, will make list when I know what they do.

can you send me your "bda.log" file from DD\devices folder? after trying with diseqc commands and 8psk on SkyStar HD2

BDA 2.5.0 doesn t work for me.

Win 7 32bits
Skystar HD mantis

setting diseqc v1.0 or v2.0
port 1 hotbird 6/7/8
port 2 astra 1f/1g....

astra => ok
hotbird => nothing

all it s ok whit BDA -/c-/T 1.08 scanMan

good luck

*****************
[04/08/10 08:22:05 : ] >> DeviceGetList
[04/08/10 08:22:05 : 16] - Filter [TechniSat Mantis DVBS BDA Receiver]
[04/08/10 08:22:05 : 16] - Filter [DVBLink Tuner #1]
[04/08/10 08:22:05 : 16] - Filter [DVBLink Tuner #2]
[04/08/10 08:22:05 : 16] - Filter [DVBLink Tuner #3]
[04/08/10 08:22:05 : 16] - Filter [DVBLink Tuner #4]
[04/08/10 08:22:05 : 16] << DeviceGetList pDL->Count:5
[04/08/10 08:22:05 : 16] StartDevice() dwDeviceNo:0
[04/08/10 08:22:05 : 16] >> DeviceGetList
[04/08/10 08:22:05 : 16] - Filter [TechniSat Mantis DVBS BDA Receiver]
[04/08/10 08:22:05 : 16] - Filter [DVBLink Tuner #1]
[04/08/10 08:22:05 : 16] - Filter [DVBLink Tuner #2]
[04/08/10 08:22:05 : 16] - Filter [DVBLink Tuner #3]
[04/08/10 08:22:05 : 16] - Filter [DVBLink Tuner #4]
[04/08/10 08:22:05 : 16] << DeviceGetList pDL->Count:5
[04/08/10 08:22:05 : 47] BDA Device Name: [TechniSat Mantis DVBS BDA Receiver] (Tuner Type:1)
[04/08/10 08:22:05 : 47] add_filter (TechniSat Mantis DVBS BDA Receiver)
[04/08/10 08:22:05 : 47] add_filter (Microsoft DVBS Network Provider)
[04/08/10 08:22:05 : 63] TuningSpace Name: 'Antenna' NetworkType: {00000000-0000-0000-0000-000000000000}
[04/08/10 08:22:05 : 63] TuningSpace Name: 'ATSC' NetworkType: {0DAD2FDD-5FD7-11D3-8F50-00C04F7971E2}
[04/08/10 08:22:05 : 63] TuningSpace Name: 'ATSCCable' NetworkType: {0DAD2FDD-5FD7-11D3-8F50-00C04F7971E2}
[04/08/10 08:22:05 : 63] TuningSpace Name: 'AuxIn1' NetworkType: {00000000-0000-0000-0000-000000000000}
[04/08/10 08:22:05 : 63] TuningSpace Name: 'Cable' NetworkType: {00000000-0000-0000-0000-000000000000}
[04/08/10 08:22:05 : 63] TuningSpace Name: 'ClearQAM' NetworkType: {143827AB-F77B-498D-81CA-5A007AEC28BF}
[04/08/10 08:22:05 : 63] TuningSpace Name: 'DC-DVBs' NetworkType: {FA4B375A-45B4-4D45-8440-263957B11623}
[04/08/10 08:22:05 : 63] TuningSpace Name: 'DD2 DVB-S' NetworkType: {FA4B375A-45B4-4D45-8440-263957B11623}
[04/08/10 08:22:05 : 63] Enumeration found 8 tuning spaces
[04/08/10 08:22:05 : 63] Found TuningSpace
[04/08/10 08:22:05 : 63] BDACardType: 20
[04/08/10 08:22:05 : 63] GetTunerInterfaces: Pin types (2) :
[04/08/10 08:22:05 : 78] GetTunerInterfaces: Pin 0 Type = Input
[04/08/10 08:22:05 : 78] GetTunerInterfaces: Pin 1 Type = Output
[04/08/10 08:22:05 : 78] GetTunerInterfaces: Node types (2):
[04/08/10 08:22:05 : 78] GetTunerInterfaces: Node 0 Type = 0
[04/08/10 08:22:05 : 78] GetTunerInterfaces: Node 1 Type = 1
[04/08/10 08:22:05 : 78] GetTunerInterfaces: Node interfaces:
[04/08/10 08:22:05 : 78] GetTunerInterfaces: Interfaces on NodeType 0 (5 interfaces):
[04/08/10 08:22:05 : 78] GetTunerInterfaces: {992CF102-49F9-4719-A664-C4F23E2408F4} IID_IBDA_LNBInfo
[04/08/10 08:22:05 : 78] GetTunerInterfaces: {71985F47-1CA1-11D3-9CC8-00C04F7971E0} IID_IBDA_FrequencyFilter
[04/08/10 08:22:05 : 78] GetTunerInterfaces: {1347D106-CF3A-428A-A5CB-AC0D9A2A4338} IID_IBDA_SignalStatistics
[04/08/10 08:22:05 : 78] GetTunerInterfaces: {F84E2AB0-3C6B-45E3-A0FC-8669D4B81F11} Unknown Interface
[04/08/10 08:22:05 : 78] GetTunerInterfaces: {AAAAAAAA-9654-4149-AD5A-F39339815538} Unknown Interface - QueryInterface FAILED ! - hr = 0x80004002
[04/08/10 08:22:05 : 78] GetTunerInterfaces: Interfaces on NodeType 1 (1 interfaces):
[04/08/10 08:22:05 : 78] GetTunerInterfaces: {EF30F379-985B-4D10-B640-A79D5E04E1E0} IID_IBDA_DigitalDemodulator
[04/08/10 08:22:05 : 78] add_filter (TechniSat Mantis DVBS Caputre BDA Receiver)
[04/08/10 08:22:05 : 78] technisat_init()
[04/08/10 08:22:05 : 78] ttBdaDrvApi_Dll.dll loaded from DD devices folder.
[04/08/10 08:22:05 : 109] add_filter (Sample Grabber)
[04/08/10 08:22:05 : 109] add_filter (MPEG-2 Demultiplexer)
[04/08/10 08:22:05 : 109] add_filter (BDA MPEG2 Transport Information Filter)
[04/08/10 08:22:05 : 125] StartDevice() OK
[04/08/10 08:22:05 : 125] ----------------------------------------------------------------------------
[04/08/10 08:22:05 : 125]
[04/08/10 08:22:06 : 813] SendDiseqc() E0 10 38 F5 Len:4
[04/08/10 08:22:06 : 813] technotrend_send_diseqc(<E0 10 38 F5 >, 4)
[04/08/10 08:22:06 : 813] SendDiseqc() E0 10 38 F5 Len:4
[04/08/10 08:22:06 : 813] technotrend_send_diseqc(<E0 10 38 F5 >, 4)
[04/08/10 08:22:06 : 828]
[04/08/10 08:22:06 : 828] SetTuner() 12522000, V, 22000000 Mod:1 LOF:10600000 22Khz:1
[04/08/10 08:22:07 : 1453] Status: Locked
[04/08/10 08:22:07 : 1453] Locked bSignalLocked:1 bSignalPresent:1 lStrength:80 lQuality:80
[04/08/10 08:22:12 : 6422]
[04/08/10 08:22:12 : 6422] SetTuner() 12581000, V, 22000000 Mod:1 LOF:10600000 22Khz:1
[04/08/10 08:22:12 : 7016] Status: Locked
[04/08/10 08:22:12 : 7016] Locked bSignalLocked:1 bSignalPresent:1 lStrength:80 lQuality:80
[04/08/10 08:22:12 : 7016]
[04/08/10 08:22:12 : 7016] SetTuner() 12581000, V, 22000000 Mod:1 LOF:10600000 22Khz:1
[04/08/10 08:22:13 : 7641] Status: Locked
[04/08/10 08:22:13 : 7641] Locked bSignalLocked:1 bSignalPresent:1 lStrength:80 lQuality:80
[04/08/10 08:22:13 : 7641]
[04/08/10 08:22:13 : 7641] SetTuner() 12581000, V, 22000000 Mod:1 LOF:10600000 22Khz:1
[04/08/10 08:22:14 : 8250] Status: Locked
[04/08/10 08:22:14 : 8250] Locked bSignalLocked:1 bSignalPresent:1 lStrength:80 lQuality:80
[04/08/10 08:22:19 : 13672]
[04/08/10 08:22:19 : 13672] SetTuner() 12090000, V, 27500000 Mod:0 LOF:10600000 22Khz:1
[04/08/10 08:22:19 : 14156] Status: Locked
[04/08/10 08:22:19 : 14156] Locked bSignalLocked:1 bSignalPresent:1 lStrength:80 lQuality:80
[04/08/10 08:22:19 : 14156]
[04/08/10 08:22:19 : 14156] SetTuner() 12090000, V, 27500000 Mod:0 LOF:10600000 22Khz:1
[04/08/10 08:22:20 : 14656] Status: Locked
[04/08/10 08:22:20 : 14656] Locked bSignalLocked:1 bSignalPresent:1 lStrength:80 lQuality:80
[04/08/10 08:22:20 : 14656]
[04/08/10 08:22:20 : 14656] SetTuner() 12090000, V, 27500000 Mod:0 LOF:10600000 22Khz:1
[04/08/10 08:22:20 : 15156] Status: Locked
[04/08/10 08:22:20 : 15156] Locked bSignalLocked:1 bSignalPresent:1 lStrength:80 lQuality:80
[04/08/10 08:22:26 : 21047] SendDiseqc() E0 10 38 F3 Len:4
[04/08/10 08:22:26 : 21047] technotrend_send_diseqc(<E0 10 38 F3 >, 4)
[04/08/10 08:22:26 : 21047] SendDiseqc() E0 10 38 F3 Len:4
[04/08/10 08:22:26 : 21047] technotrend_send_diseqc(<E0 10 38 F3 >, 4)
[04/08/10 08:22:26 : 21094]
[04/08/10 08:22:26 : 21094] SetTuner() 12692000, H, 27500000 Mod:0 LOF:10600000 22Khz:1
[04/08/10 08:22:27 : 21672] Status: Locked
[04/08/10 08:22:27 : 21688]
[04/08/10 08:22:27 : 21688] SetTuner() 12692000, H, 27500000 Mod:0 LOF:10600000 22Khz:1
[04/08/10 08:22:30 : 24656] Status: No lock

Hello you

I'm a fan of the program of your dvbdream

But I am having a problem I have installed the program

BDA did not recognize on the card my

My card

AzureWave TWINHAN AD-SP 410

Please help me run the card in a special program you

Wait for response technical support

Thank you for your understanding

Engineer Company HP
Amer