DvbDream Community

If you change the Channel Up, Channel Down, or both shortcut on remote management window using a Twinhan remote, there's no way to put the default setting back, if you press the CH+ cursor goes up the list and change the Power key code, and if you press CH- cursor goes down the list and change Optional 3 key code.

_________________
Forum PCTVSat : http://pctvsat.free.fr
-----------------------------------------------------------------------
Pinnacle PCTV Sat + Terratec Cinergy 1200 DVB-S / Athlon 64 3500+ - 2048 Mb DDR - GeForce 7900 GS
Twinhan Vision Plus 1030A + Asus Europa II Hybrid / PIV D920 2x2.8 Ghz - 2048 Mb DDR2 - GeForce 7600 GS
PCTV Sat Pro PCI (PCTV 450i) + DVICO Fusion HDTV USB / Athlon XP 3200+ - 1024 Mb DDR - GeForce 6600GT
-----------------------------------------------------------------------
Collective installation with 2 LNB Quad and multiswitches DiseqC - LNB A = Astra 19.2°E - LNB B = Hotbird 13.0°E - Commutation = 13V/18V/22K + DiseqC 2.0

fixed in v1.3b

_________________
DVB Dream - because I have to dream about having time to code it

Thanks

Nowadays, I've found a way to do that in 1.3a, you have to select the first assigned entry of the list when DD is waiting for a key code for Channel Up (the same thing with the last entry for Channel Down)

But if it's fixed in previous release it's better

_________________
Forum PCTVSat : http://pctvsat.free.fr
-----------------------------------------------------------------------
Pinnacle PCTV Sat + Terratec Cinergy 1200 DVB-S / Athlon 64 3500+ - 2048 Mb DDR - GeForce 7900 GS
Twinhan Vision Plus 1030A + Asus Europa II Hybrid / PIV D920 2x2.8 Ghz - 2048 Mb DDR2 - GeForce 7600 GS
PCTV Sat Pro PCI (PCTV 450i) + DVICO Fusion HDTV USB / Athlon XP 3200+ - 1024 Mb DDR - GeForce 6600GT
-----------------------------------------------------------------------
Collective installation with 2 LNB Quad and multiswitches DiseqC - LNB A = Astra 19.2°E - LNB B = Hotbird 13.0°E - Commutation = 13V/18V/22K + DiseqC 2.0