filtres and codecs detection bugs

the bugs that are most likely related to user configuration (like a specific hardware, codec or driver prob) or impossible to find a logical reason at the moment. The problems in this category might be fixed in future versions as users keep confirming them with additional information.

Moderators: Dreamer, FredB, X05

abdou31dz
Just can't stay away
Posts: 42
Joined: Thu Nov 01, 2007 12:09 pm

Postby abdou31dz » Sun Nov 04, 2007 4:56 am

Hmm... OK, new version is working, but audio codec is not working now. :? With old version of Cyberlink it was working good.

Image

for me it work with 1.3c :shock:

SkYSTAR 2 PCI,DRIVER 4.4.1
DVBDREAM 1.4
WINDOWS XP
abdou31dz
Just can't stay away
Posts: 42
Joined: Thu Nov 01, 2007 12:09 pm

Postby abdou31dz » Sun Nov 11, 2007 11:19 am

same proleme with DD 1.4C...i continue to use DD 1.3C.

please fix it...I want use last version :cry:
SkYSTAR 2 PCI,DRIVER 4.4.1
DVBDREAM 1.4
WINDOWS XP
arwa
Just can't stay away
Posts: 25
Joined: Thu Jun 21, 2007 4:12 am

Postby arwa » Wed Nov 14, 2007 6:16 am

same here

just install xp and i cant run any video codec
skystar 2
User avatar
faam
Home away from home
Posts: 53
Joined: Wed Oct 18, 2006 1:06 pm

Postby faam » Wed Nov 14, 2007 7:02 am

I had observed that the guides for DScaler Audio and Video decoders was using the same class id
so the right class id for each will be as follows:

VIDEOCODEC10=DScaler Video , {F8904F1F-0371-4471-8866-90E6281ABDB6}
AUDIOCODEC8=DScaler Audio , {D2CA75C2-05A1-4915-88A8-D433F876D186}

Regards
Skystar2,driver4.3.2,Xp sp2,nvidia mx4000 driver v91.93,P4 2.8,512RAM,DD1.4d
abdou31dz
Just can't stay away
Posts: 42
Joined: Thu Nov 01, 2007 12:09 pm

Postby abdou31dz » Sat Nov 17, 2007 1:35 pm

please fix this bug please,i wanna use last version from dvbdram :roll: :roll: :roll: :roll:
SkYSTAR 2 PCI,DRIVER 4.4.1
DVBDREAM 1.4
WINDOWS XP
User avatar
faam
Home away from home
Posts: 53
Joined: Wed Oct 18, 2006 1:06 pm

Postby faam » Sun Nov 18, 2007 7:27 am

please fix this bug please,i wanna use last version from dvbdram :roll: :roll: :roll: :roll:
Hi
If you mean my post just add the guides
DScaler Video , {F8904F1F-0371-4471-8866-90E6281ABDB6}
DScaler Audio , {D2CA75C2-05A1-4915-88A8-D433F876D186}
infront of every codec number in the guides.ini in dvbdream folder and save it

and if you mean the codecs that not working
it is now all working in the last version 1.4d

Regards
Skystar2,driver4.3.2,Xp sp2,nvidia mx4000 driver v91.93,P4 2.8,512RAM,DD1.4d
abdou31dz
Just can't stay away
Posts: 42
Joined: Thu Nov 01, 2007 12:09 pm

Postby abdou31dz » Sun Nov 18, 2007 1:10 pm

please fix this bug please,i wanna use last version from dvbdram :roll: :roll: :roll: :roll:
Hi
If you mean my post just add the guides
DScaler Video , {F8904F1F-0371-4471-8866-90E6281ABDB6}
DScaler Audio , {D2CA75C2-05A1-4915-88A8-D433F876D186}
infront of every codec number in the guides.ini in dvbdream folder and save it

and if you mean the codecs that not working
it is now all working in the last version 1.4d

Regards
i correcte it but I have same probleme.....Image and sound work correctly but I have always this message saying graph can't be created and video codec and video render with RED case
SkYSTAR 2 PCI,DRIVER 4.4.1
DVBDREAM 1.4
WINDOWS XP
User avatar
Dreamer
Moderator
Posts: 1214
Joined: Fri Jun 16, 2006 5:46 pm

Postby Dreamer » Sun Nov 18, 2007 4:16 pm

Try other renderer - VMR9...
Dreamer
abdou31dz
Just can't stay away
Posts: 42
Joined: Thu Nov 01, 2007 12:09 pm

Postby abdou31dz » Mon Nov 19, 2007 6:41 am

Try other renderer - VMR9...
I try all possible configuration..........all works well with 1.3c...but never with 1.4.....
SkYSTAR 2 PCI,DRIVER 4.4.1
DVBDREAM 1.4
WINDOWS XP
jerryt
love DVB Dream!
Posts: 153
Joined: Mon Jun 19, 2006 11:15 am

Postby jerryt » Mon Nov 19, 2007 12:23 pm

Try other renderer - VMR9...
I try all possible configuration..........all works well with 1.3c...but never with 1.4.....
@abdou31dz, relocation can not fix a problem which is only on YOUR computer.

To build a graph, there most be a source, codec filters and a renderer. My guess would be that your source for 1.4d is not registered or the source is not tuned to any video. "Can not build graph" happens to me if there is not any video to build a graph from, tunning a channel normally gets me pass that error.

Good luck.
Twinhan 1020a driver 2.4.1.1, Skystar2 2.3 driver 4.4.0, Genpix USB, T90 and SG2100 w QPH-031.
abdou31dz
Just can't stay away
Posts: 42
Joined: Thu Nov 01, 2007 12:09 pm

Postby abdou31dz » Mon Nov 19, 2007 1:36 pm

Try other renderer - VMR9...
I try all possible configuration..........all works well with 1.3c...but never with 1.4.....
@abdou31dz, relocation can not fix a problem which is only on YOUR computer.

To build a graph, there most be a source, codec filters and a renderer. My guess would be that your source for 1.4d is not registered or the source is not tuned to any video. "Can not build graph" happens to me if there is not any video to build a graph from, tunning a channel normally gets me pass that error.

Good luck.
I have the same probleme with 4 computers....

that's say that can't create graph but I have a correct image and sound with all channels !!
SkYSTAR 2 PCI,DRIVER 4.4.1
DVBDREAM 1.4
WINDOWS XP
User avatar
faam
Home away from home
Posts: 53
Joined: Wed Oct 18, 2006 1:06 pm

Postby faam » Tue Nov 20, 2007 6:41 am

Hi
Please try fresh installation with disabling the log file and try VMR with decoder that not using hardware acceleration and with channel that with normal sound not that with the AC3 multiple channels and also try using the direct connect to your Audio hardware instead of default direct sound
like Realtech or Nividia or Sigmatel or what ever your audio card is

and always test the compination after closing dvbdream and inter the application with shift key after you pressed the dvbdream shortcut

regards
Skystar2,driver4.3.2,Xp sp2,nvidia mx4000 driver v91.93,P4 2.8,512RAM,DD1.4d
jerryt
love DVB Dream!
Posts: 153
Joined: Mon Jun 19, 2006 11:15 am

Postby jerryt » Tue Nov 20, 2007 7:22 am

Hmm... OK, new version is working, but audio codec is not working now. :? With old version of Cyberlink it was working good.

Image

for me it work with 1.3c :shock:
abdou31dz, something to try

Dvbdream under preferences select "attach graph to ROT", restart Dvbdream.

Open Dvbdream start play back, open Graphedit, select "Connect to remote graph" select the only choice.

Compare graph with what you were trying to select, lower merit value or unregister codec's which are hijacking your graph.
Twinhan 1020a driver 2.4.1.1, Skystar2 2.3 driver 4.4.0, Genpix USB, T90 and SG2100 w QPH-031.
warre
Just popping in
Posts: 7
Joined: Sat Oct 20, 2007 8:44 am
Location: Kouvola,finland

Postby warre » Fri Nov 23, 2007 12:46 pm

I have strange problem, when i select cyberlink audiocodec it gets loaded but previous audiocodec still is used:
Image
Artec T14BR dvb-t usb receiver
Core2duo e6300
Geforce 8600Gt
Windows Vista 32bit
User avatar
FredB
love DVB Dream!
Posts: 315
Joined: Fri Jun 16, 2006 1:19 pm
Location: France
Contact:

Postby FredB » Fri Nov 23, 2007 2:53 pm

Audio codec has not been updated by Cyberlink, but release date for both audio, mpeg video and h.264 video is 2007/11/14, so you use the latest release of audio codec.
Forum PCTVSat : http://pctvsat.free.fr
-----------------------------------------------------------------------
Pinnacle PCTV Sat + Terratec Cinergy 1200 DVB-S / Athlon 64 3500+ - 2048 Mb DDR - GeForce 7900 GS
Twinhan Vision Plus 1030A + Asus Europa II Hybrid / PIV D920 2x2.8 Ghz - 2048 Mb DDR2 - GeForce 7600 GS
PCTV Sat Pro PCI (PCTV 450i) + DVICO Fusion HDTV USB / Athlon XP 3200+ - 1024 Mb DDR - GeForce 6600GT
-----------------------------------------------------------------------
Collective installation with 2 LNB Quad and multiswitches DiseqC - LNB A = Astra 19.2°E - LNB B = Hotbird 13.0°E - Commutation = 13V/18V/22K + DiseqC 2.0

Return to “Undetermined”

Who is online

Users browsing this forum: No registered users and 1 guest