Help needed: DD doesn't find any channels using Twnihan 1027

[eranshl]

Hi,

I am connected to 4 LNB via Twinhan 1027 on Vista OS. my dish is well tuned as I get above 80% signal from all LNB using a standart DVB receiver.

using DD, it succeed to scan 13E on port 1 but when scanning other LNB ll other, it find some channels from 13E but not from specific SAT defined.

I have defined 4 SAT into DD Diseqc confguration: 13E on port 1, 16E on port 2, 7W on port 3 and 4W on port 4.
I have double checked LOF paramters (Ku linear)
I am updated with latest BDA driver and tried BDA-All_108 as well.

nothing works.

I have tried using ProgDVB and it succeed to scan all relevant TP but application is not so stable.

any other suggesions ?

[rel]

we need manufacturer programming documantations (SDK), to add full
diseqc support

you should talk to distributor or manufacturer ancd try to persuade them to provide SDK. (Twinhan is not that willing to do that)

[ahmedgamalzidan]

Just go to OPTION Preference
and change the voltage from 18 to 13
and it will work