dvb dream causes ntdll.dll to crash

[zortan]

This is the error:

Applicazione che ha provocato l'errore dvbdream.exe, versione 1.3.3.0, modulo che ha provocato l'errore ntdll.dll, versione 5.1.2600.2180, indirizzo errore 0x00011e58.

It's in italian, i will translate:

The application has caused the error is dvbdream.exe ver 1.3.3.0, module that has caused this is ntdll.dll ver 5.1.2600.2180, error address 0x00011e58.

0000: 6c707041 74616369 206e6f69 6c696146
0010: 20657275 62766420 61657264 78652e6d
0020: 2e312065 2e332e33 6e692030 64746e20
0030: 642e6c6c 35206c6c 322e312e 2e303036
0040: 30383132 20746120 7366666f 30207465
0050: 31313030 0d383565 0a

Description:

I have 4 LNB's tuned at 7E, 13E, 19.2E, 28.2E with a TT3200.

Usually all is good until i use 7E and 13E (this error happens very rarely, but happen), often when i use 19,2E and absolutely always with 28.2E.
I'm not able to understand if is dvbdream or my system.
My system is very updated and well managed, and also very stable under gaming and also using all kind of software.
I'm trying to understand if is a diseq switch error or something other. For finish the channel scan in 28.2 E i've done two or three transponders each time otherwise the error appear, but also changing channel causes this. Usually for have the error is only necessary to select a random 28.2E channel, wait for the channel is tuned, begin to see and after 20-25 seconds CRASH !
This is very strange because errors happen a lot of time after the channel is properly tuned.
(note: HD channels are properly displayed)
DVB dream is very beautiful (it has the screen zoom, i can use my 16/9 monitor using this feature) and this error cause me frustrating.

Thank to all can give me suggestions.

[rel]

- try with other codecs
- try BDA PSI Hotfix: http://support.microsoft.com/kb/896626
- try Scanman's BDA_ALL device

[Feyip]

- try with other codecs
- try BDA PSI Hotfix: http://support.microsoft.com/kb/896626
- try Scanman's BDA_ALL device

Where can I download the BDA_ALL download? I've read a lot of posts talking about it, but every download site has corrupted headers in it.
I have a TT-3200, which was working fine with my old ATI gpu for SD, but having upgraded to the geforce 7800 to improve HD reception, it worked for a bit, but now the SD has become really unstable - the mpeg2 decoding bar fills then empties, so the signal is really jerky.
I've got cyberlink 7 codecs installed, and tried Core AVC (which caused the system to crash).
Also tried moving the TT-3200 to other PCI slot.
Have installed the hotfix file

Thanks, it was working, which makes it more annoying