DvbDream Community

Hi

i have been (trying) to test 1.2 final

but the card first starts with a signal, as soon as u do anythig like select a channel etc the signal is lost, scan or anything else tries just shows no signal at all

the only way i can get it to work (once per time) is to start up server4pc select the transponder needed for the tv channel, select the channel in DD then select the transponder with server4pc to activate it

if u tray and change to another channel (even on the same transpoder) the signal is lost again

i have even tried to copy and rename the older version of the driver from 1.1h but this does the same

DD ver 1.1h still works fine though ..........

warlord

_________________
Technisat cablestar 2 drivers v4.4.0
windows XP sp2

hi,

there are some changes in new b2c2 device (it uses driver directly now instead of SDK) I think it will need a small fix for dvb-c


can you try following patches and let me know if one of these fixes the problem ?

_________________
DVB Dream - because I have to dream about having time to code it

hi rel

thanks for the reply and fixes

it seems (for now anyway) test1 is working, only done small testing

test2 dosent keep the signal, but i noticed in server4pc that when u changed channel (same transpoder) then it changed the freq from say 411 to 0.411 and the signal was lost

hope the info helps

keeping test1 running for now

thanks again

war

_________________
Technisat cablestar 2 drivers v4.4.0
windows XP sp2

Is Cablestar working now with 1.2b correctly?

_________________
Dreamer