DvbDream Community

Still the same error dialogs, no such dialogs with Scanman's device. However NO crash on exit with any version of your device.

_________________
Dreamer

Still the same error dialogs, no such dialogs with Scanman's device. However NO crash on exit with any version of your device.
Error messages are from my driver.
You can try the latest S2 driver (1.1.2.101) - that's what I'm using and get no errors on DD start.
Also try running dream.exe > log.txt from cmd, then upload/pm me the log file.

_________________
Skystar2 2.3 + Skystar HD2 + SG-2100 + TwinLNB

I tried last beta drivers (1.1.2.101) but i have still same problem on close.
I tried to use dvbdream without plugins but i have same problem on close.

Sorry for disturb and my bad english.

_________________
Terratec Cinergy S2 CI

hi
your driver produces more packet losses than BDA driver
if I start Mantis-Driver, it will induce packet losses every 30 seconds (10 aprox.)
if I change to BDA driver, it won't produce any
why?

P.S: I don't connect power supply
P.S.2: when I change view to renderless or renderless to view or begin to record, induce packet losses. This problem is generated by my pc ¿?¿? Don't happen with my Pinnacle PCTV Sat/DVBT cards

regards

_________________
TwinHan DTV-DVBT 878 - AverMedia Volar Black 850T USB - Pinnacle PCTV Sat 400i - SkyStar HD2 - Ati Radeon 9550 256MB - 1GB RAM DDR - DVBDream 1.4i - Windows XP SP3 updated

No idea, but no one else had similar problem, so it's probably some problem with your hardware or software... who knows.
Juse use BDA driver then if it works better for you...

P.S: I don't connect power supply
Why? The SS HD2 card needs more power and it may damage your motherbord or itself if you don't do so.

_________________
Skystar2 2.3 + Skystar HD2 + SG-2100 + TwinLNB

Because I didn't have any cable -__-"

Today I have connected power supply and SS produces same problem with power supply.

Signal: 60% Astra 19.2E

P.S.: DVB-S2 channels works fine. No packet losses o.O

EDIT: your driver work fine in DD 1.4i. In DD 1.5e, problems o.O
I have checked this packet losses. In according to ProjectX, this errors are trust.

_________________
TwinHan DTV-DVBT 878 - AverMedia Volar Black 850T USB - Pinnacle PCTV Sat 400i - SkyStar HD2 - Ati Radeon 9550 256MB - 1GB RAM DDR - DVBDream 1.4i - Windows XP SP3 updated

Hello again root

In testing...
Windows 7
DVBDream ver 1.5c
Terratec Cinergy S2 CI with 1.01.01.901
no diseqc
Work perfect

same configuration with diseqc 1.0 or 2.0

"Error at "diseqc send", code 8007001F"

Then it works good.

Ty and sorry 4disturb

_________________
Terratec Cinergy S2 CI

Please I want to BDA card AzureWave TWINHAN AD-SP 410

_________________
TWINHAN AD-SP410

First post updated with new version.

Attached are latest 1.1.2.501 drivers for SS2HD (Thx Terratec!)

EDIT: For some reason this driver doesn't want to tune DVB-S2 channels... investigating it

_________________
Skystar2 2.3 + Skystar HD2 + SG-2100 + TwinLNB

hi

I've tried it with my Skystar HD2 at driver 1.3 from technisat website

the same error
"Error at "diseqc send", code 8007001F"

thank you

_________________
Skystar HD 2
AMD Athlon 5200+
nVidia gt 8600

same error for me

_________________
TwinHan DTV-DVBT 878 - AverMedia Volar Black 850T USB - Pinnacle PCTV Sat 400i - SkyStar HD2 - Ati Radeon 9550 256MB - 1GB RAM DDR - DVBDream 1.4i - Windows XP SP3 updated