1.4 - Channel switching - delay and freezing
Moderators:Dreamer, FredB, X05
Picture is freezing when I switch the channels, there is a few sec. delay (sound is OK), then it's OK - bug similar to early beta versions, also in the last beta 7, but it's even worse now, delay is sometimes, very often even few minutes!! Once even 3 minutes! Then video is playing very fast and then it's OK.
There is also small, but stable freezing, sometimes, similar to freezing with ATI codec only in beta 6, but now it's always with ATI, sometimes (quite often) also with InterVideo.
Tested with Technisat 4.4.0 and 4.4.1, ATI Catalyst 7.5 and 7.10. FTA and scrambled channels. I tried to increase "delay for stability while channel changing to 300ms, then to 1000ms. Tried also to toggle Full TS mode, other device - direct and WDM. Tested also with disabled timeshift. CPU usage is about 10%, when freezing it's 0-3%.
It works perfect with the same codecs (InterVideo, ATI...) in v1.3c. I'm using the same codecs / renderers / settings / guids.ini / plugins...
19.2°E 12460,H,27500 imusic TV (BetaDigital) 4:2:0
19.2°E 11973,V,27500 MTV Germany (MTV Networks Europe) 4:2:0
Video Codec.....: InterVideo (v4.0.5.43 - 23. 5. 2002)
Audio Codec.....: InterVideo (v4.0.11.83 - 25. 2. 2003)
H264 Codec......: ATI MPEGVD (v9.15.0.233 - 13. 7. 2007)
Video Renderer..: Video Mixing Renderer 9
Audio Renderer..: Default DirectSound Device
Hardware: AMD Athlon 64 3000+, 1GB RAM, ATI RX800 256MB, HDD 320GB SATA II, SB Audigy 2, SkyStar 2 r2.3, Monitor LCD Samsung 215TW 21", Dish-Offset 120cm...
Software: Windows XP SP2, DirectX 9.0c, ATI Catalyst Driver 7.10, ATT, TechniSat DVB 4.4.1, IE7, Abakt, avast! Antivirus, Avant Browser, DVB Dream, FFDShow, Free Download Manager, FreeCommander, HotkeyP, Kerio Personal Firewall, Media Player Classic, Nero, OpenOffice.org, Photofiltre, PTBSync, Skype, Spybot, Trillian, Xnview, ZipGenius...
There is also small, but stable freezing, sometimes, similar to freezing with ATI codec only in beta 6, but now it's always with ATI, sometimes (quite often) also with InterVideo.
Tested with Technisat 4.4.0 and 4.4.1, ATI Catalyst 7.5 and 7.10. FTA and scrambled channels. I tried to increase "delay for stability while channel changing to 300ms, then to 1000ms. Tried also to toggle Full TS mode, other device - direct and WDM. Tested also with disabled timeshift. CPU usage is about 10%, when freezing it's 0-3%.
It works perfect with the same codecs (InterVideo, ATI...) in v1.3c. I'm using the same codecs / renderers / settings / guids.ini / plugins...
19.2°E 12460,H,27500 imusic TV (BetaDigital) 4:2:0
19.2°E 11973,V,27500 MTV Germany (MTV Networks Europe) 4:2:0
Video Codec.....: InterVideo (v4.0.5.43 - 23. 5. 2002)
Audio Codec.....: InterVideo (v4.0.11.83 - 25. 2. 2003)
H264 Codec......: ATI MPEGVD (v9.15.0.233 - 13. 7. 2007)
Video Renderer..: Video Mixing Renderer 9
Audio Renderer..: Default DirectSound Device
Hardware: AMD Athlon 64 3000+, 1GB RAM, ATI RX800 256MB, HDD 320GB SATA II, SB Audigy 2, SkyStar 2 r2.3, Monitor LCD Samsung 215TW 21", Dish-Offset 120cm...
Software: Windows XP SP2, DirectX 9.0c, ATI Catalyst Driver 7.10, ATT, TechniSat DVB 4.4.1, IE7, Abakt, avast! Antivirus, Avant Browser, DVB Dream, FFDShow, Free Download Manager, FreeCommander, HotkeyP, Kerio Personal Firewall, Media Player Classic, Nero, OpenOffice.org, Photofiltre, PTBSync, Skype, Spybot, Trillian, Xnview, ZipGenius...
Dreamer
I tried that option in beta 7, it was not better, but it looks it helps in the final version - 1.4, I need more time to test.
However, that small, stable freezing is still there, with InterVideo and ATI, I'll try other codecs soon. It works perfect with the same settings, at the same channel immediately after I close DD 1.4 and start 1.3c.
However, that small, stable freezing is still there, with InterVideo and ATI, I'll try other codecs soon. It works perfect with the same settings, at the same channel immediately after I close DD 1.4 and start 1.3c.
Dreamer
More information - after few minutes of testing / per codec, recording all the time - v1.4:
InterVideo (v4.0.5.43 - 23. 5. 2002) - InterVideo (v4.0.11.83 - 25. 2. 2003)
- stable freezing, about 2 freezes per second
CyberLink (v4.0.0.113 - 17. 12. 2002) - CyberLink (v5.0.0.33 - 5. 8. 2003)
- no freezing
nVidia (v0.0.0.227 - 25. 2. 2003) - nVidia (v0.0.0.227 - 25. 2. 2003)
- no freezing
Sonic DVB (v2.5.3.16 - 26. 3. 2003) - CyberLink (v5.0.0.33 - 5. 8. 2003)
- huge stable freezing, worse than InterVideo
FFDShow (v1.0.3.21 - 22. 3. 2007) - CyberLink (v5.0.0.33 - 5. 8. 2003)
- minor stable freezing, almost invisible
ATI (v9.15.0.233 - 13. 7. 2007) - ATI (v9.15.0.233 - 13. 7. 2007)
- small stable freezing
I tried working codecs also after "non-working" codecs, CyberLink and nVidia are working always, others are freezing, always.
All codecs are working erfect with 1.3c, tested right after I closed 1.4.
I tried also 1.4 beta 5, all codecs are working good, except Sonic.
InterVideo (v4.0.5.43 - 23. 5. 2002) - InterVideo (v4.0.11.83 - 25. 2. 2003)
- stable freezing, about 2 freezes per second
CyberLink (v4.0.0.113 - 17. 12. 2002) - CyberLink (v5.0.0.33 - 5. 8. 2003)
- no freezing
nVidia (v0.0.0.227 - 25. 2. 2003) - nVidia (v0.0.0.227 - 25. 2. 2003)
- no freezing
Sonic DVB (v2.5.3.16 - 26. 3. 2003) - CyberLink (v5.0.0.33 - 5. 8. 2003)
- huge stable freezing, worse than InterVideo
FFDShow (v1.0.3.21 - 22. 3. 2007) - CyberLink (v5.0.0.33 - 5. 8. 2003)
- minor stable freezing, almost invisible
ATI (v9.15.0.233 - 13. 7. 2007) - ATI (v9.15.0.233 - 13. 7. 2007)
- small stable freezing
I tried working codecs also after "non-working" codecs, CyberLink and nVidia are working always, others are freezing, always.
All codecs are working erfect with 1.3c, tested right after I closed 1.4.
I tried also 1.4 beta 5, all codecs are working good, except Sonic.
Dreamer
I think DD v1.3c was better for me becouse when I useed DD v1.4 the pictuer keep frozen and some times it don't show up when I change the channles , I don't know may be I need to use it and try it more , with I use the same codec
I will try to get in to it more
Thanks Rel
I will try to get in to it more
Thanks Rel
my card is K-World BDA,
the reception to the channels I need is good,
the reception to the channels I need is good,
Same prob as i wrote here.
Seems to be independent either using Native or BDA_ALL.
Sometimes you can solve it with switching to another channel, sometimes you have to wait a few seconds/minutes to have a fluid view.
Must be a bug inside DD.
Seems to be independent either using Native or BDA_ALL.
Sometimes you can solve it with switching to another channel, sometimes you have to wait a few seconds/minutes to have a fluid view.
Must be a bug inside DD.
.
Visit the german DD-Forum: www.dvbdream.de
_________________________________________
90cm Dish on Rotor STAB HH 120 / Uni-LNB + 90cm Dish / Dual-Quad-LNB to 9/8 MultiSwitch for 23.5°E/19.2°E --- SkyStar 2, SkyStar USB-Box plus, TwinHan 1041 S2, Technotrend S-3200 S2, DVBWorld S2, Terratec Cinergy T USB XE --- a few PCs with AMD-CPU/ASUS-Boards from Athlon-2400+ to 64 X2 5600+, 1-2GB RAM, totally up to 2 TB HardDisk, nVidia Graphics. All using XP-Professional - everytime up2date
Visit the german DD-Forum: www.dvbdream.de
_________________________________________
90cm Dish on Rotor STAB HH 120 / Uni-LNB + 90cm Dish / Dual-Quad-LNB to 9/8 MultiSwitch for 23.5°E/19.2°E --- SkyStar 2, SkyStar USB-Box plus, TwinHan 1041 S2, Technotrend S-3200 S2, DVBWorld S2, Terratec Cinergy T USB XE --- a few PCs with AMD-CPU/ASUS-Boards from Athlon-2400+ to 64 X2 5600+, 1-2GB RAM, totally up to 2 TB HardDisk, nVidia Graphics. All using XP-Professional - everytime up2date
I can't see/feel any differenc if 'Reset on Channel change' or 'Reset on overflow' is checked.
Here i have not a real freeze - more than very short (max. 1/4 sec) flickering. Not so easy to describe.
Here i have not a real freeze - more than very short (max. 1/4 sec) flickering. Not so easy to describe.
.
Visit the german DD-Forum: www.dvbdream.de
_________________________________________
90cm Dish on Rotor STAB HH 120 / Uni-LNB + 90cm Dish / Dual-Quad-LNB to 9/8 MultiSwitch for 23.5°E/19.2°E --- SkyStar 2, SkyStar USB-Box plus, TwinHan 1041 S2, Technotrend S-3200 S2, DVBWorld S2, Terratec Cinergy T USB XE --- a few PCs with AMD-CPU/ASUS-Boards from Athlon-2400+ to 64 X2 5600+, 1-2GB RAM, totally up to 2 TB HardDisk, nVidia Graphics. All using XP-Professional - everytime up2date
Visit the german DD-Forum: www.dvbdream.de
_________________________________________
90cm Dish on Rotor STAB HH 120 / Uni-LNB + 90cm Dish / Dual-Quad-LNB to 9/8 MultiSwitch for 23.5°E/19.2°E --- SkyStar 2, SkyStar USB-Box plus, TwinHan 1041 S2, Technotrend S-3200 S2, DVBWorld S2, Terratec Cinergy T USB XE --- a few PCs with AMD-CPU/ASUS-Boards from Athlon-2400+ to 64 X2 5600+, 1-2GB RAM, totally up to 2 TB HardDisk, nVidia Graphics. All using XP-Professional - everytime up2date
the DD 1.4 really seemes to be the best of all but still need some aded to fix the frozen buges and also not showen some channles sometimes,and some times too I need to restart the whole computer to start it again
Thanks for the great job
Thanks for the great job
my card is K-World BDA,
the reception to the channels I need is good,
the reception to the channels I need is good,
Channel changing is OK now in 1.4b, but small stable freezes are still there, but only with VMR9. Overlay works strange, sometimes it works good, sometimes there is very small freezing, or the same as with VMR9 (at some channels only, they are in the first post). Generic renderer doesn't work at all (don't know why), VMR is working good with Cyberlink (New).
CyberLink (New) (v8.0.0.126 - 18. 7. 2007)
In v1.3c it's all working good - same channels/codecs/renderers/settings/ch. list/plugins...
CyberLink (New) (v8.0.0.126 - 18. 7. 2007)
In v1.3c it's all working good - same channels/codecs/renderers/settings/ch. list/plugins...
Dreamer
same probleme like hereChannel changing is OK now in 1.4b, but small stable freezes are still there, but only with VMR9. Overlay works strange, sometimes it works good, sometimes there is very small freezing, or the same as with VMR9 (at some channels only, they are in the first post). Generic renderer doesn't work at all (don't know why), VMR is working good with Cyberlink (New).
CyberLink (New) (v8.0.0.126 - 18. 7. 2007)
In v1.3c it's all working good - same channels/codecs/renderers/settings/ch. list/plugins...
http://www.dvbdream.org/forum/viewtopic ... 5&start=15
SkYSTAR 2 PCI,DRIVER 4.4.1
DVBDREAM 1.4
WINDOWS XP
DVBDREAM 1.4
WINDOWS XP
Yes, me too, this topic has been split, continue here please:i got same freezes with 1.4c
http://www.dvbdream.org/forum/viewtopic.php?t=1315
Dreamer
Return to “Old bug reports & requests”
Who is online
Users browsing this forum: No registered users and 1 guest