filtres and codecs detection bugs
Moderators: Dreamer, FredB, X05
filtres and codecs detection bugs
with 1.3c,that's work fine
with 1.4 with same configuration
with 1.4 with same configuration
SkYSTAR 2 PCI,DRIVER 4.4.1
DVBDREAM 1.4
WINDOWS XP
DVBDREAM 1.4
WINDOWS XP
It's an old bug (1.3x / 1.4x), reported several times in this and beta test forum. Cyberlink is working with VMR and Overlay renderers only, it doesn't work with VMR9 and Generic renderer, tested in 1.3c and 1.4, also with default settings.
Hardware: AMD Athlon 64 3000+, 1GB RAM, ATI RX800 256MB, HDD 320GB SATA II, SB Audigy 2, SkyStar 2 r2.3, Monitor LCD Samsung 215TW 21", Dish-Offset 120cm...
Software: Windows XP SP2, DirectX 9.0c, ATI Catalyst Driver 7.10, ATT, TechniSat DVB 4.4.1, IE7, Abakt, avast! Antivirus, Avant Browser, DVB Dream, FFDShow, Free Download Manager, FreeCommander, HotkeyP, Kerio Personal Firewall, Media Player Classic, Nero, OpenOffice.org, Photofiltre, PTBSync, Skype, Spybot, Trillian, Xnview, ZipGenius...
Hardware: AMD Athlon 64 3000+, 1GB RAM, ATI RX800 256MB, HDD 320GB SATA II, SB Audigy 2, SkyStar 2 r2.3, Monitor LCD Samsung 215TW 21", Dish-Offset 120cm...
Software: Windows XP SP2, DirectX 9.0c, ATI Catalyst Driver 7.10, ATT, TechniSat DVB 4.4.1, IE7, Abakt, avast! Antivirus, Avant Browser, DVB Dream, FFDShow, Free Download Manager, FreeCommander, HotkeyP, Kerio Personal Firewall, Media Player Classic, Nero, OpenOffice.org, Photofiltre, PTBSync, Skype, Spybot, Trillian, Xnview, ZipGenius...
Dreamer
Re: filtres and codecs detection bugs
in my dvb dream player there is nothing in "actice directshow filters" box.with 1.3c,that's work fine
with 1.4 with same configuration
whats must i do can u plz help???
i have already installed mpeg-2 codecs(inculedes cycberlink,moonlight exct.allthe codec thats mpeg-2 gives me) but not shown in the box!!
skystart2,1 stallilte one lnb
no , it works fine. there is no such a bug.It's an old bug (1.3x / 1.4x), reported several times in this and beta test forum. Cyberlink is working with VMR and Overlay renderers only, it doesn't work with VMR9 and Generic renderer, tested in 1.3c and 1.4, also with default settings.
I am on the following configuration right now:
Video Codec.....: CyberLink (New) (v6.0.0.138 - 2/7/2007)
Audio Codec.....: CyberLink (New) (v6.1.0.84 - 2/8/2007)
H264 Codec......: CoreAVC (v1.5.0.1 - 8/26/2007)
Video Renderer..: Video Mixing Renderer 9
Audio Renderer..: Default DirectSound Device
Video Card: nVidia Geforce 8600GT
I think problem was related to hardware /graphic card drivers or codec versions before.
but the problem mentioned on this thread might have been caused by just a broken settings file.
install the trial versions of following programs to have Intervideo and Cyberlink codecsin my dvb dream player there is nothing in "actice directshow filters" box.
whats must i do can u plz help???
i have already installed mpeg-2 codecs(inculedes cycberlink,moonlight exct.allthe codec thats mpeg-2 gives me) but not shown in the box!!
- Intervideo WinDVD
- Cyberlink PowerDVD
also try other renderers to see if they work
Last edited by rel on Sat Nov 03, 2007 10:20 am, edited 1 time in total.
DVB Dream - because I have to dream about having time to code it
sorry but iI delete dvbdreamfolder when i uinstal it (it's clean instal)It's an old bug (1.3x / 1.4x), reported several times in this and beta test forum. Cyberlink is working with VMR and Overlay renderers only, it doesn't work with VMR9 and Generic renderer, tested in 1.3c and 1.4, also with default settings.
i have a same ERROR with dvbdream 1.4 with all 4 video render...I uinstall it,iI delete folder,I install dvbdream 1.3c and that's work with all video render.....i uinstal DD 1.4 and I delete folder,when I put DD 1.3c again,that's work perfectly again...
I have a same error with 3 PC.......i think that's bug in program
SkYSTAR 2 PCI,DRIVER 4.4.1
DVBDREAM 1.4
WINDOWS XP
DVBDREAM 1.4
WINDOWS XP
abdou31dz, both of them working fine here. I guess you have a problem with rendererI add that i have try nividia pure video and intevideo 8 with 1.4 and i have the same errors.........but that's work perfectly with 1.3c
In the screenshots of your first post , I can see you are not trying the same configuration. (you have succeeded with VMR in v1.3c, but you are now trying VMR9 in v1.4)
since I can't reproduce these here, I will consider there is no particular codec-detection or incompatibility bug with Cyberlink, nVidia or Intervideo in v1.4
DVB Dream - because I have to dream about having time to code it
no , it works fine. there is no such a bug.It's an old bug (1.3x / 1.4x), reported several times in this and beta test forum. Cyberlink is working with VMR and Overlay renderers only, it doesn't work with VMR9 and Generic renderer, tested in 1.3c and 1.4, also with default settings.
I am on the following configuration right now:
Video Codec.....: CyberLink (New) (v6.0.0.138 - 2/7/2007)
Audio Codec.....: CyberLink (New) (v6.1.0.84 - 2/8/2007)
H264 Codec......: CoreAVC (v1.5.0.1 - 8/26/2007)
Video Renderer..: Video Mixing Renderer 9
Audio Renderer..: Default DirectSound Device
Video Card: nVidia Geforce 8600GT
I think problem was related to hardware /graphic card drivers or codec versions before.
but the problem mentioned on this thread might have been caused by just a broken settings file.
install the trial versions of following programs to have Intervideo and Cyberlink codecsin my dvb dream player there is nothing in "actice directshow filters" box.
whats must i do can u plz help???
i have already installed mpeg-2 codecs(inculedes cycberlink,moonlight exct.allthe codec thats mpeg-2 gives me) but not shown in the box!!
- Intervideo WinDVD
- Cyberlink PowerDVD
also try other renderers to see if they work
i did what u said but nothig happend:( nothing in filter box as u see in the capture.
any more help??
You do not have the required permissions to view the files attached to this post.
skystart2,1 stallilte one lnb
make sure you have installed latest version of Directxi did what u said but nothig happend:( nothing in filter box as u see in the capture.
any more help??
make sure you have ddsource.ax registered (double click and run ddreg.bat)
try by selecting Intervideo for both Video and Audio. try to use VMR9 or VMR
if the things above doesnt help, then you might think of re-installing your operating system
DVB Dream - because I have to dream about having time to code it
Here too :abdou31dz, both of them working fine here.
Forum PCTVSat : http://pctvsat.free.fr
-----------------------------------------------------------------------
Pinnacle PCTV Sat + Terratec Cinergy 1200 DVB-S / Athlon 64 3500+ - 2048 Mb DDR - GeForce 7900 GS
Twinhan Vision Plus 1030A + Asus Europa II Hybrid / PIV D920 2x2.8 Ghz - 2048 Mb DDR2 - GeForce 7600 GS
PCTV Sat Pro PCI (PCTV 450i) + DVICO Fusion HDTV USB / Athlon XP 3200+ - 1024 Mb DDR - GeForce 6600GT
-----------------------------------------------------------------------
Collective installation with 2 LNB Quad and multiswitches DiseqC - LNB A = Astra 19.2°E - LNB B = Hotbird 13.0°E - Commutation = 13V/18V/22K + DiseqC 2.0
-----------------------------------------------------------------------
Pinnacle PCTV Sat + Terratec Cinergy 1200 DVB-S / Athlon 64 3500+ - 2048 Mb DDR - GeForce 7900 GS
Twinhan Vision Plus 1030A + Asus Europa II Hybrid / PIV D920 2x2.8 Ghz - 2048 Mb DDR2 - GeForce 7600 GS
PCTV Sat Pro PCI (PCTV 450i) + DVICO Fusion HDTV USB / Athlon XP 3200+ - 1024 Mb DDR - GeForce 6600GT
-----------------------------------------------------------------------
Collective installation with 2 LNB Quad and multiswitches DiseqC - LNB A = Astra 19.2°E - LNB B = Hotbird 13.0°E - Commutation = 13V/18V/22K + DiseqC 2.0
confirmed working well with vmr9 in 1.4 and audio sync is perfect in h.264 as well.
Video Codec.....: CyberLink (New) (v8.0.0.55 - 9/6/2007)
Audio Codec.....: nVidia (New) (v4020.185.0.0 - 10/17/2005)
H264 Codec......: CoreAVC (v1.5.0.0 - 8/5/2007)
Video Renderer..: Video Mixing Renderer 9
Audio Renderer..: Realtek HD Audio output
I did have the problem with cyberlink audio not working, but it has never worked for me as long as i can remember. I prefer nvidia audio codec, as you can enhance sound TREMENDOUSLY by switching to any of the 3 settings of NORMAL, LATE NIGHT, and THEATER. Late Night setting is excellent for movies or programs in which talking seems low in scenes. If you havent tried nvidia for audio, give it a try.
Video Codec.....: CyberLink (New) (v8.0.0.55 - 9/6/2007)
Audio Codec.....: nVidia (New) (v4020.185.0.0 - 10/17/2005)
H264 Codec......: CoreAVC (v1.5.0.0 - 8/5/2007)
Video Renderer..: Video Mixing Renderer 9
Audio Renderer..: Realtek HD Audio output
I did have the problem with cyberlink audio not working, but it has never worked for me as long as i can remember. I prefer nvidia audio codec, as you can enhance sound TREMENDOUSLY by switching to any of the 3 settings of NORMAL, LATE NIGHT, and THEATER. Late Night setting is excellent for movies or programs in which talking seems low in scenes. If you havent tried nvidia for audio, give it a try.
AMD AM2 X2 6000+/2gb ram/8800gts 320mb/Skywalker-1/XPS2 OS
P4 2.8/1gb ram/Geforce 6800 128mb/Skystar2/XPS2 OS
P4 2.8/1gb ram/Geforce 6800 128mb/Skystar2/XPS2 OS
Who is online
Users browsing this forum: No registered users and 1 guest