DvbDream Community

I have tried to get this combination working since I started using DVBDream. I always get "Incompatible codec or renderer combination is selected. Graph couldn't be created." error.

I am using DVB Dream 1.4i and FFDShow 1.05.123 dated 12/6/2007.

I really need this to work for the volume normalization that FFDShow offers.

Is there a magic version I need?

_________________
-=Hardware=-
Asus M2A-VM HDMI, Althon 64 X2 6400+, 4GB DDR2 800, 256MB DDR3 GeForce 8600GT, 1.8TB HDD, Skywalker-1, 47" 1080p LCD
-=Software=-
XP Pro 32 SP2, DVBDream 1.4i, em**ation 3.0.3.2

test with AC3filter
www.free-codecs.com

_________________

Pinnacle PCTV-SAT, Twinhan VP1030 CI (yellow) & DVB-T MobiDTV Pro
Sappire X1950Pro 512Mb DDR3 256bit (AGP)
140 cm parabola with inverto 0.3dB SRT-V50 30E<->57W

Same error. This has been an issue that has persisted across 3 different computers and 4 different versions of DVB Dream. The only audio decoder it will let me use is the nVidia audio decoder or null (no Cyberlink, no FFDShow, No AC3 Filter).

WTF? Others are using FFDShow, and FFDShow works with everything else. What versions are you people that are having success using? The version I have works with MPC, MP9, MT, Prog, AltDVB, and as I recall, MediaPortal, but none of these other DVB apps support my Skywalker-1 and MPEG-4.

I can use FFDShow video decoder for MPEG-2 in DVB Dream, but not for audio.

FYI, I am using hacked nVidia v4020.150.0.0 for MPEG-2, and CoreAVC v1.6.0.0 For h.264. VMR9 is the Video renderer, and Default Direct Sound Device for the audio renderer.

_________________
-=Hardware=-
Asus M2A-VM HDMI, Althon 64 X2 6400+, 4GB DDR2 800, 256MB DDR3 GeForce 8600GT, 1.8TB HDD, Skywalker-1, 47" 1080p LCD
-=Software=-
XP Pro 32 SP2, DVBDream 1.4i, em**ation 3.0.3.2

Have yuo tried Gabest MPA audio decoder it also decode AC3 and its quality is superb
And for your knowledge FFdshow is working with me but withh use mp3lib not libmad for both mp3 and mp2 I did not tried it for AC3 " but nvidia works for both and gabest works too for both "
and let ffdshow connected to the default direct sound

Regards

_________________
Skystar2,driver4.3.2,Xp sp2,nvidia mx4000 driver v91.93,P4 2.8,512RAM,DD1.4d

No, I haven't tried it. It's not my sound quality that is the issue. My sound quality with nVidia is fantastic. It's the difference in volume levels between providers, and even channels on the same provider sometimes. On Chuck it is much lower than on Beverly, especially on the HD channels.

So when you switch channels between providers, the audio goes from acceptable levels to very loud. FFDShow has a normalizer function that evens out the audio, so it doesn't go from soft to loud when you change channels. This works very well, and it is the reason I need to get FFDShow audio decoder to work with DVB Dream.

I really don't understand why it will work with everything else I have tried it on, but DD refuses to build the graph. I have also often wondered why DD comes with graphedit if I'm not allowed to use custom graphs.

I have read the post about loading the profiles to set FFDShow up for DD, but I can't load the profiles unless DD loads the decoder.

_________________
-=Hardware=-
Asus M2A-VM HDMI, Althon 64 X2 6400+, 4GB DDR2 800, 256MB DDR3 GeForce 8600GT, 1.8TB HDD, Skywalker-1, 47" 1080p LCD
-=Software=-
XP Pro 32 SP2, DVBDream 1.4i, em**ation 3.0.3.2

Supersnail:
I am having a similar problem as you have with version 1.4i p1.
Using the slider to change the audio level has no effect on my HD channels.
This works fine for me with SD channels.
It's annoying but I can live with that for now.

At least I have HD (h.264) something MT has promised, but still has not yet delivered

_________________
Chilli
Gigabyte GA-965P-DS3 MB
Intel Core 2 DUO E6400 (OC to 2.8 Ghz)
EVGA 8600 GTS 256MB
G. SKill 2 Gig RAM DDR2 800, Sony XBR 70 LCD TV
Skywalker-1, ATI 650, 3x 500 Gb SATA HD, DP44 Switch
Vista Ultimate / MCE 2005, DD 1.4i p1

There is alot of stuttering lost frames when change a channel to h264. Restarting DD solves the problem, but why does it do it ?
only code for h264 that works for me is the coreavc. arcsoft stutters a lot all the time. Cybelink stutters too and there is audio out of sync.
How can this be fixed ?

_________________
4400 X2 Athlon 2gig ddr2 ram, 8800 gt 512pci-e
Vista 32bit w/Genpix.Always trouble with h264.

bump...

_________________
4400 X2 Athlon 2gig ddr2 ram, 8800 gt 512pci-e
Vista 32bit w/Genpix.Always trouble with h264.

Hi

same probleme here in undetermined BUG

http://www.dvbdream.org/forum/viewtopic.php?t=1275

_________________
SkYSTAR 2 PCI,DRIVER 4.4.1
DVBDREAM 1.4
WINDOWS XP