I am unable to test here ,
but added the support according to their documentation
rest is up to you and your card revision
sorry, if it doesnt work.
Great job!!! Just tested v1.5a
The result is as follows:
RAW DiSEqC works fine if the modified version of Sky2PCAVSrc.ax (uploaded above) is used. If the original version is used, the motor does not move
The positioner console does not seem to work as well, regardless of the version of Sky2PCAVSrc.ax. Entering RAW command into the field and pressing 'Send' in Positioner does not have any effect. The only thing which works is the RAW DiSEqC command under the corresponding tab in satellite properties.
For some reason when I switch between the channels from different satellites I have to click the new channel twice (the second time after the dish has already moved to a new position). Otherwise the screen remains black after the dish has moved. This is not the case when switching between the same satellite channels. Why so?
Also, I tried to use the DD USALS algorithm in Positioner for calculating the RAW DiSEqC commands which I insert into the RAW DiSEqC Tab under satellite properties, and it seems this algorithm provides wrong DiSEqC values. GoTo Angle command does not work as well. So I had to copy the DiSEqC commands from AltDVB (which does not work with SS2 under x64 OS)
Luckily they seem to work in DD under x64 after that
Hope you'll be able to fix some of the above. GoTo Angle is very useful, maybe you could just implement this one at least to work correctly
And something to avoid the necessity to click the channel for the second time after the dish has moved...