Thx for the last mail. I saw that the TS-Buffer is still really to small - your/this card/driver is sending about 770KB of Data at once... That causes the crash / freeze after starting. I increased it up 1.5MB. Should be enough now.
The next version should organize the buffer automatically up to the real needed size. That saves memory on machines with a little less of it...
Becaus DiSEqC is not an implemented feature in BDA, i used a little familar trick to do this.
Works on Terratec and Technisat (Technotrend) cards/Boxes but unfortunately not with every Hardware-BDA-Driver...
Neccessary to get it working is to have DiSEqC-setup in DD to 'v1.0 or 2.0' and set the related Satelleites to the correct Port !
Also urgent is to set 'Always force to resend diseqc commands' under Options/Preferences/Performance.
Repeat count must be minimum 1 (thats enough) - NOT ZERO !
THIS IS VERY URGENT - OTHERWISE DD SENDS NO DISEQC-COMMAND !
SkyStar HD should work also- if my SS-Box USB plus will work, this card should do it also with the same kind of drivers.
I added some features for TwinHan-Users:
DiSEqC-command will directly written to the card and supports RAW-DiSEqC as e.g. driving my/a rotor.
TwinHan Mantis-chips will be recognized correctly (by BDA...)
In the future it should be possible to use CI / CAM with DD and those kind of cards ! (not only Mantis, every TwinHan-CI)
My new TwinHan 1041 S2 CI works fine - but a little bit slow. I thing that depends on the driver itself. Unfortunately there is no newer Version than 18.104.22.168 available. Older/other driver for Mantis-Chips won't work.
But i've still a prob with HD in DD. DD tunes well - but no pic and sound becauseAudio-renderer is alwys marked red. I can't use Default DS or RealTek AC97. The graph won't be build by DD.
When i open the Video-Manager, click Apply and then EXIT (OK didn't work !), i always get a picture but no sound....
Should be fixed by rel in DD V1.4
EDIT: Works with Intervideo-Codec from WinDVD8 - but sound is still araound a half second late to the picture...
There is now an newer Version 1.04 available here again: http://www.dvbdream.de/site_download_544.html
After implementing some other features for (my) TwinHan and some expected bugs, i will set up a new thread in the common DD section here so that more users will have access to it.
YES & PLEASE: you can place it in the PC-TV-forum as well. But please write/give all the neccessary information discused here too. Your french will be much more better than mine...
Visit the german DD-Forum: www.dvbdream.de
90cm Dish on Rotor STAB HH 120 / Uni-LNB + 90cm Dish / Dual-Quad-LNB to 9/8 MultiSwitch for 23.5°E/19.2°E --- SkyStar 2, SkyStar USB-Box plus, TwinHan 1041 S2, Technotrend S-3200 S2, DVBWorld S2, Terratec Cinergy T USB XE --- a few PCs with AMD-CPU/ASUS-Boards from Athlon-2400+ to 64 X2 5600+, 1-2GB RAM, totally up to 2 TB HardDisk, nVidia Graphics. All using XP-Professional - everytime up2date