Under options, select preferences, select performance tab, Check mark "Always force to resend diseqc command", in box below that labeled "Diseqc repeat count" enter 2 or 3. Use special switches modified for twinhan poor diseqc signal; hXXp://board.mytheatre.ru/viewtopic.php?t=4514&start=75&sid=6b47...

Thanks again guys for your help

Under options, select preferences, select performance tab, Check mark "Always force to resend diseqc command", in box below that labeled "Diseqc repeat count" enter 2 or 3. Use special switches modified for twinhan poor diseqc signal; hXXp://board.mytheatre.ru/viewtopic.php?t=4514&start=75&sid=6b47...

Well then...... Huff and Puff
If you would have Read my Signature you would have Seen the Legacy LNBs, but I am sure you never make mistakes.

That’s exactly what my set up looks like WITH OUT THE TWO 119 Birds I only have One, the 119 Echo 7 Bird


What’s Next Professor?

Makes perfect sense, as I did with all of the above. Once no signal came back as results I thought it best to ask here for those who have more experience with given variables. The Box states Diseqc 2 4 in one as selected with no results.... I always read the "labels" manuals when they apply, did a s...

Well I sorted that last one out on my own.......

Ya have to have at least a Mini to get anything

Oh well until the Guru's can help I am back to MT, I was looking forward to a superior product that i have heard so much about.....

ThX

OK I deleted old settings
Added new 110 to port 1 left settings (LOF) to default

first 3 no channels........ as I wait for more


Do I understand you correctly to NOT have Diseqc 1 or 2 checked?


Thanks once again

Will try NOW

LOF1 and 2 at 11250000 correct?
SW 0
Yes legacy LNBs with Diseqc 4 in one

THANKS
ps even at default LOF settings........ nada

ok, your LOF settings are fine, should be 11250. What kind of switch is it? You're sure it's a Diseqc switch? Not a 22khz switch or something. 2 port? 4 port? Even if it's a 2 port switch you're probably going to need to use the Diseqc 1.0/2.0 setting, just leave 2 port settings empty. The simple D...

xdonxdon
Almost Identical issue here as well, TwinHan 102G working in MT, I have Circular LNB (Old DTV style) with Sat1 at 110 and 119 on Sat2 on Diseqc 4 in 1

Any settings to configure a positive scan would be greatly appreciated,

Thanks much

I am in the same boat.....

I have looked for a "set up read me" but may have over looked.....

I have No idea what my LOF, 22kHz, INI file, etc. are...

Any guidance is appreciated

Thx