Test Environment: DVB Dream v1.7, Windows 7 Pro, 32 BIT
Manufacturer: Genpix
Model: USB Adapter Rev2
Type: USB
Supports T8PSK
Diseqc switch works?: Yes
Diseqc motor/raw diseqc works?: Yes
RC works?: Twinhan, Yes
CI works?: Not in Use at my station
Notes: Device works well without any problems

Sure, see attached. Working very nicely btw. Good picture, quite stable.

When the 20 min is up in tv window mode, it goes renderless and there is no way to exit the program, gotta go to task manager and kill it.

When using the mouse wheel to adjust volume the channel list scrolls with it.

Genpix usb rev 2/win 7

some more eueka logs

Seems like it always involves an h.264 channel. Euraeka logs attached. The first one is from 1.4e with the modified ddsource, the second from 1.4f.

Edit: here is another eureka log.

Like the topic says, lots of crashes on channel changes. Eureka logs attached. Ops, please delete attachment after you get it.


[edit by rel]: attachment deleted, thanks

I have been having trouble with getting picture started on some h.264 channels and notice that the status bar is reporting that the image is 720x480 29.9 fps 4:3 when in fact it is 1920x1080, the new upper status bar reports 58 fps and it is 16x9. When picture fails to start fps on the upper status ...

Faster channel changes, but no pic/sound at startup on h.264 until channel change, all codec's redded out. After channel change many dropped frames.

Thanks for positioner set on program start. Been wishing for that for many versions. did it work ? lol (couldn't test it here.) thanks for the comments new motor, positioner and diseqc set fine on startup. Thanks New motor gives an opportunity to point out that the positioner control locks up the p...

Upon further testing, yes and no. The positioner is moving, but I think the diseqc switch is not getting set. Bring up MT on E7 which is on port 1 and shut it down. Start DD on E5 which is on port 2, positioner moves but no signal, change channels and signal pops right in. I have 2 lnb's, 1 Invacomp...

Love the collapsable gui main window stuff, very nice. Thanks for positioner set on program start. Been wishing for that for many versions. Positioner window elements a bit off, graphic at top is covering up title bar slightly (certainly no big deal). For some reason (on a couple versions now) progr...

I think you need DD to move to the satellite at start-up? You use different DD installations and other programs which could also move the dish? If so, an option might be added for that.

That would be very nice.

For those of us who use more than one program, set positioner to sat of last channel when "go to last channel" is selected for startup.

ATSC is not supported on DD. Any BDA ATSC device can tune to frequencies with DD but scan won't work and it won't display video. This is due to ATSC - DVB compability issues. It might be supported in future. Ok, thanks, but be aware picture and sound are fine with the new bda driver, just can't cha...

Yes, i got nowhere with the old BDA-T, but the new one pulls in whatever station it is tuned from last use in another program.

If I don't set up a transponder list with frequencies, how do you suggest I change channels?

What I am trying to do is change channels.