Hi Genpix I am scanning this bird under Mytheatre using skywalker 1 it will not pick up the T8PSK TPs. No problem with other TPs. Any idea? I would be surprised if you can tune to any T8PSK transponder on this sat, cause Anik F3 does not use 8PSK at all :roll: do you see any 8PSK in my INI file ? H...

LNB Tyepe = Other lof1=10750000 lof-sw=12750000 lof2=10750000 I guess, you already tried "NA legacy", LOF = 10750000 & 22kHz = Off. And it did not work, right? This LNB is connected to the (222KHz off) side on the Zinwell which in turns connected to the port3 on the diseqc. Thanks Wow! This is the ...

free1965tv, I think maybe I can answer your question, I have the same thing as you do, and I get the signals what you are looking for (you know what I mean :). There are 2 thing you need to do. 1. You need to monitor TP 12000, move you d*sh a little bit east from 119, you will get better signal for...

Hi Genpix I use this same LNB on two different brand of STB configured as standard LNB with no issue tuning in to any TPs from 11.75 to 12.75. Same LNB has no issue using Mytheatre. Under Dvbdream I defined the LNB as other. I can tune in to the 12.20 GHz and up TPs but not the 11.75 - 12. 20 Ghz TP...

and how have you described this LNB in DVB Dream?

btw, what's the model number (and manufacturer) of this LNB?

LOF1=10750000 SW=12750000 LOF2=1075000 22KHz off

This LNB is connected to 22KHz port (off)

Model CB2008A

If you google it you can easily find this LNB

I am using this wide band circular LNB special wide band circular lnb • Input Frequency Range from 11.70Ghz ~ 12.75Ghz • Output Frequency Range from 950Mhz ~ 2000Mhz • L.O.: 10.75GHz I tried to scan TPs from 11.71 to 12.15 Ghz and not picking up anything. But this same LNB can scan all TPs fro...

Maybe Rel can help?

Hi
Running 1.4H. The audio codec shows red color. What is that mean? Everything is working just fine.

I have the following setup Receiver ---- Chieta Heavy Duty Diseqc ---- 4x4 Zinwell Multiswitch --- LNBs This setup is currently working just fine for FTA STB without any issue. What is the proper setting for diseqc and switch for this configuration. I can't seem to get any signal at all. The DVB-S i...