So considering I have already ordered the DPP TWINS, it sounds like I now need to order and use a DPP44 switch? I wish someone might have mentioned that Plus LNB's were not going to work but what's done is done. I will order the DPP44 to go with the LNB's that are on their way.

One last question (I hope). I have ordered a pair of dish network dish pro plus lnb's. Each is a dual lnb. One will be looking at 110/119 and one will be pointed at 82/91. As I understand it, each lnb will have two outputs and one input (no intent to use this one). I have also read that it is import...

Looks like I need some new LNB's then, thanks for you help.

The LNB's are older Legacy Twin units. Basically there is one LNB for each of the4 satellites. There is the capability of connecting two output feeds from each LNB but I am only using one of the two in every case. The four LNB's then feed into ports 1,2,3 and 4 on a CHIETA HEAVY DUTY 4X1 DISEQC SWIT...

I'm sorry to have missed providing the "settings", I do appreciate your attempt to help. I have the switch type set as v1.0/2.0 Diseqc switch Port 1 - Nimiq 1 Port2 - Nimiq 2 Port 3 - Echostar 7 Port 4 - Echostar 8,10 For each of the above ports the following settings were selected - LOF: Lof 1 - 11...

Genpix, thanks for responding. The other settings I am talking about are shown under the properties button after selecting the particular satellite. For instance, if I pick Nimiq1, and then properites, you can select from tabs labled LOF Settings, Raw Diseqc, 22KHz and Uncommited. Now I am not going...

I recently purchased a Genpix Skywalker DVB Card and have been trying to get it configured for sometime now. I recently got to the point that it is at least working to some extent. With My Theatre I can scan 110/119 and 82/91 and find most of the channels you would expect. I have also used the same ...