Me too, i just wait for it.

how the space between lines on channel list can be increased?
I found how to increase channel list fonts but not how to increase this space.

Also is it possible, by user, to increase Menu tabs, fonts, everything? If yes, may i know how do do it?

Thank you

Hi guys I came back from my vacation after two weeks i turned on my htpc. Right now i can't scan any transponder. Just before finish the scanning DD is freezing. I reinstalled the drivers , same i remove dd completely an cleaned the registers, same i tried the oldest versions of dd, works but for al...

in the log, I see several transponders which say that there is a lock but at the same time they have [3540] genpix 8PSK: WaitForXfer() timed out buffer = 0 *********** lines after that. As if data are simply not coming (and lock is lost). What signal quality do you have on those transponders? how b...

HTPC-PC.LOG Please do the following: 1) start DebugView (Microsoft utility) 2) start DVB Dream and try to scan few transponders, both polarities on each satellite 3) close DVB Dream . First i reinstalled my windows. I have Acronis image made after everything was installed excepted codecs , players ...

I did what you said and it is working now but only 61.5 and 91. 82 dead ... NO SIGNAL on all channels other small issue comes now:) I have signal 100% an quality 98% where before i had 37% - 40% you mentioned that you have one dish with two LNBs for 82/91. Are you sure you have two separate Single/...

soon there will be full support for that, I am currently improving DD's BDA interface.

Thank You!

I did what you said and it is working now but only 61.5 and 91.
82 dead ... NO SIGNAL on all channels

other small issue comes now:) I have signal 100% an quality 98% where before i had 37% - 40%

Hello, I have the following config: Windows7 32, genpix dvb card with BDA drivers, 2 Dishes: one for 61.5 and one for 91 and 82. All 3 lnb are going in to a diseqc switch seesat sd-41m On port 1, I configured sat 82w, in port4 91w and in port3 61.5w. With DD 1.5e; f and g everything was fine but now...