I'm using dishpro lnb's, and a twinhan 102g. A dish pro quad for 110/119, and a dish pro twin for 61.5. At this point I have only been trying to get 110/119, thinking 6t1.5 would fall in line. The two lnb's feed into a dp34 with going into the following ports: 1: 61.5 2: 110 3: 119 The switch curre...

I do not know how to code at all other than a little MS Access, however I found this at MSDN. It might be a good starting point.

http://msdn2.microsoft.com/en-us/library/ms802485.aspx

Honestly I've never played with MCE2005. However, I'm guessing it may be an incompatability with DD and MCE. I've heard alot of people complaining about using DVB-S cards and apps with MCE. Some work and some don't. I'm guessing since DD is in it's development stage that there may be some quirks wit...

It's working fine for me. The epg does not pass it to the scheduler it passes it to the Windows Task Scheduler in the Control Panel.

Sounds like you are having a scanning issue. Sometimes if the scan timing is too short it will only pick up the hex number for the channel. Not the actual channel name. If you use the DD channel list to list each transponder you will most likely find that the channel names for some transponders are ...

Ok. Well, I didn't see that feature listed in the help file anywhere. My mistake. However, there is still one problem. If you select to record a program using DVBEPG it doesn't show up in the scheduler. So what do I do in this case?

1st off, are you sure that DVBEPG is losing the channel names or is it possible that the EPG data for that channel is not populated? I've noticed that if there is no EPG data for a particular channel it will not show up in the guide. However, if you tune to the proper transponder for EPG population ...

It would be nice if DD was to return to renderless mode after scheduled record was finished. Right now if you schedule a program it will execute DD or "wake" it from renderless mode, record the program and then continue to play the current channel after the program is finished. It would be nice to h...

Cool! Thank you very much for that explaination. So really it's not necessary to use BDA drivers if WDM drivers are working just fine. In fact if you are using DVB-S you want to stay away from BDA if all possible.

Thanks again for that explaination.

-Comp

Thanks for that info. Thats good to know. Now about those BDA drivers. What in the world is the difference between them and WDM drivers?

If you choose "none" it doesn't give you the port numbers because you are telling it that you do not have a switch. However, if you put the raw commands in you are telling it to manualy switch to the proper port thus not needing to use a switch setting. If you use the raw command with the mini swtic...

I recently decided to install the BDA drivers for my twinhan 102g card and they crashed DD. So much so that I had to reinstall because I didn't see anywhere in the ini to change what device I was using. Are twinhan BDA drivers working in DD? I'm somewhat confused between the difference in BDA and WD...

I have a dish with two LNBs - Astra 19.2° and Hotbird 13° My device is the TerraTec 1200 DVB-S card with BDA drivers. It works great ! But I can only watch Astra 19.2 which is on the 1rst LNB. I'm not able to get the channels on Hotbird, I tried it so many times with different configurations. How...

1st of all, I want to thank you for the awsome changes to DD. It's running very stable and is now my primary DVB software. I'm only having one small issue. When I try to assign buttons for my remote, some do not work. Play, pause, stop, and OK do not seem to work. I'm using a 32 button twinhan remot...

Or you can just get a DPP44 switch and not worry about all this.

Sure! You can spend money and fix almost any problem. But thats too easy and not always an option. So, I thought I'd post the info for someone like me who needs his money for food.

Thanks for the info though.