1 - The only thing that my device file and the rel device file do is tune a transponder and send to DD the Transport Stream data, so if are not happening something really strange, the problem are not the device files. 2 - Long time ago I made a channel scan, so I learned how it works, if the problem...

I just see, that it should work also with r2.3, I mean diseqc motor, just patched "Sky2PCAVSrc.ax" file is needed and you have to edit BxS_SkyStar_2.ini file - change Source=MM to Source=440 when DD is closed. :D Can anyone confirm it please? I have just one confirmation from other forum and I don'...

I don't know if this is your problem, but exist a problem with some people that use the technisat driver/software, when SS2 is trying to lock a transponder the audio becomes corrupted, when you can lock the transponder the problem disappear. I had this problem and only solved it using other driver f...

Check PM and mail.

Thanks

BxS


No problem i will test.

Thanks

I mean the test version.

B2C2_direct.dev

Hum...
I also want it

Let's start competition

Snuffer,

You said that you will test it , so what I want is if you have access to a sat with lots of transponders with low symbolrates, try to lock them with BxS_SkyStar_2(MM) device and with the B2C2(rel) and tell me the results.

Thanks

If the cards would/will report signal strength without being locked onto a stream, reporting signal only, spectrum analysis would be possible. That would be a very handy feature. I don't know enough about the drivers and cards to know if that's possible. With SS2 r2.6 you can't get direct signal st...

BxS What about a spectrum analyser window so that you can see the freq a lock is not necessery if you see there is something its ok. For feedhunters for TV wachers they do not need that totaly i think. The only reason for I made the BxS SkyStar 2 - Device for DVB Dream v1.1 : http://www.dvbdream.or...

I never found the feature to be particularly useful. The problem is the DVB cards only report signal strength when it is sufficient to provide lock. I can only talk about SS2 r2.6, the problem is that the most soft APIs that you found only report signal strength when it is sufficient to provide loc...

I don't need them (thanks), but they should work if they are on homepage IMO.

I think I found a reason - one "" instead of "/".

Yes, is that the problem.

OK, so last link works, the others don't.

Try this
http://www.dvbdream.org/tutorial/1/instaling_ss2.htm
http://www.dvbdream.org/tutorial/2/instalation083c.htm
http://www.dvbdream.org/tutorial/4/gui_v3.htm

I am using an SS2 card with latest drivers (4.4.0.0). I tried to manually set LNBPowerOff=1 in Settings.ini, with no result. Is there anyone using ss2 able to power off the LNB when leaving DVBDream? Sentarou You can set LNB OFF with all SS2 driver versions, the problem is that DVB Dream don't use ...

If you (have a SkyStar 2 r2.6) want to try BxS skyStar 2 device file using M.Majoor driver but don't want to have work changing between drivers look here: http://bxsbxs.googlepages.com/Replace_SS2_r26_driver.htm You can find the "Replace_SS2_r26_driver" program that do the work for you. This is a ve...

Its realy intrested i missing only a simple file to and how to instal and copy what file to where.

Simple copy all files in the Devices directory to Dvbdream\devices directory.