How to scan different TP on frequencies

[RGLozon]

My question is and I have searched with no results
I am in NA and scanning 110.
On Frequency 12224 it is only scanning TP 2 and
not the other TP's
It took me a long time to figuire out why I was not getting certain stations
How can I add the search for all TP's

[genpix]

How can I add the search for all TP's

you have to tell DVB Dream what kind of LNBs you have (if you select/describe wrong LNBs, you will end up tuning on wrong TPs).

PS: you listed 5 LNBs and 4x4 diseqc switch. I have absolutely no idea how you can make this configuration work.

[RGLozon]

119 & 118 are a dual lnb and presently I am not actually even using the last two

[genpix]

119 & 118 are a dual lnb and presently I am not actually even using the last two

which just proves that you don't know what you are talking about.
unlike your believe, dual LNB was not designed to be used with more then one satellite (we are talking about fixed dish here, right?).

so .... whatever you said before is just a bunch of nonsense and should not be taken seriously.
Good luck with your adventures!

PS: Dude, if you wanna help, don't make us guess what did you have in mind. Tell us exactly what hardware/connection do you have, and how you described that mess in the DVB Dream config.

[RGLozon]

I guess since I am being called a liar I need to clarify what I have!
I have four seperate dishes running into a 4 in 4 out diseq.
Each has its own lnb except for the dual 118/119 lnb.
I have figured out my problem thanks to no help here!
The LOF were not set right and I didnt pick up on it.
Sorry for wasting your time.