Two problems using 1.4i in Vista

General discussion . (Do not post bug reports or feature requests in this section!)

Moderators:X05, Dreamer, FredB

johnnyc3
Posts:1
Joined:Mon Oct 15, 2007 11:10 pm
Two problems using 1.4i in Vista

Postby johnnyc3 » Sat Feb 09, 2008 4:49 pm

Two problems using 1.4i in Vista. Scheduler does not work. DD starts up, but the file size is 20kb.
Also it will not load without admin rights window popping-up, because of User Account Control. All previous builds worked fine in both regards, therefore I’ve gone back to 1.4h.
Has anyone had this problem?

Thanks,

JohnnyC3
Twinhan 1020a, 8500GT, Vista, 82,91,100,110,119
Icetech
Just can't stay away
Posts:36
Joined:Mon Dec 04, 2006 9:07 am
Contact:

Postby Icetech » Sat Feb 09, 2008 6:24 pm

disable UAC.... first thing i do on any vista install...
Asus P5B+ , C2D 6400@3.8ghz, 2gb mem
Genpix 6000 adapter, NV7600GTOC
Legacy lnb's on 4x1 disecq
sl9000 remote
dish/bev...
klystron
Not too shy to talk
Posts:14
Joined:Sun Feb 03, 2008 3:53 pm
Location:Canada

Postby klystron » Sun Feb 10, 2008 3:01 pm

Same thing here but seems to run ok if I run as admin.
1.4h didn't have this problem.
Skywalker-1 ver 1.8.120
Vista w/sp1
DD-1.4i
8800GT
DishPro 1000.2
AndiP
Posts:2
Joined:Thu Feb 14, 2008 12:26 am

v1.4i is working only with admin rights

Postby AndiP » Thu Feb 14, 2008 12:30 am

Hi!

That is my problem too.
I had to install v1.4h again because my scheduler (pvr scheduler) is not able to start DVBDream v1.4i becaus of the rights management...

Would be nice to get that fixed. :-)

Bye,
Andi
Windows Vista 32
Pinnacle PCTV 7010iX
saentist
love DVB Dream!
Posts:114
Joined:Tue Aug 28, 2007 3:02 pm
Location:Bulgaria
Contact:

Postby saentist » Thu Feb 14, 2008 4:29 am

Enable ADMINISTRATOR account
then login with it
just as on XP
Image
Pinnacle PCTV-SAT, Twinhan VP1030 CI (yellow) & DVB-T MobiDTV Pro
Sappire X1950Pro 512Mb DDR3 256bit (AGP)
140 cm parabola with inverto 0.3dB SRT-V50 30E<->57W
Image
AndiP
Posts:2
Joined:Thu Feb 14, 2008 12:26 am

Thats not the problem...

Postby AndiP » Thu Feb 14, 2008 10:50 am

Enable ADMINISTRATOR account
then login with it
just as on XP
That is not the problem. Of course I can se the admin account, but I want to use my normal user account as I've done in the past.
It is a new problem of v1.4i.
Windows Vista 32
Pinnacle PCTV 7010iX
toshiba
Just can't stay away
Posts:36
Joined:Mon Jun 19, 2006 3:39 pm

Re: Two problems using 1.4i in Vista

Postby toshiba » Thu Feb 14, 2008 11:42 am

Two problems using 1.4i in Vista. Scheduler does not work. DD starts up, but the file size is 20kb.
Also it will not load without admin rights window popping-up, because of User Account Control. All previous builds worked fine in both regards, therefore I’ve gone back to 1.4h.
Has anyone had this problem?

Thanks,

JohnnyC3
I do not have this problem, and I've done nothing but disable UAC.
CPU: Intel E6700
GPU: NVidia 8800GT 512
RAM: 8GB 800MHz
Audio h/w: Auzentech X-Fi Prelude
OS: Vista Ent. Ed. x64
DD Ver.: 1.4ip1
h.264: CoreAVC 1.7
MPEG2: Cyberlink 7.2
Audio: InterVideo 8.0
DVB Card: Genpix 8PSK-USB2 rev.1
Dishes: E* Dish 1000, E* Dishpro Single
Switch: DPP44

Return to “General”

Who is online

Users browsing this forum: No registered users and 1 guest