How does Disecq work with BDA devices?

[rel]

Hi!

I have a Kworld DVB-S100 and its working fine except for changing the Diseqc port. I am using DD version 1.3c. I read all the BDA related notes and tried the latest BDA patch. I also tried the RAW Diseqc commands with no switch and have not been able to succeed. Does any one have additional insight on what might work. The card has a Connexant chip. Is the patch that I used from this thread good for other cards also? What type of information would I need to provide to get a similar patch - not sure exactly what was modified in the patch.

Thanks

it is not listed in the supported BDA devices list :http://www.dvbdream.org/supported_devices.php


if anyone can find/send any document/SDK/sample how to set up diseqc using its BDA interfaces, it could be fixed.

[phil06]

I have the same problem as Philou5 and I tried everything in the différents configurations of this post without any succes. First with latest 4.0 bda drivers from hauppauge and with bda_all from scanman.

I have a dish with two LNBs - Hotbird 13° and Astra 19.2°

My device is the HAuppauge Nova-s + DVB-S card with BDA drivers.

But I can only watch Hotbird 13° which is on the 1rst LNB.

I'm not able to get the channels on Astra.
How must I configure this in DVB Dream 1.4i ?

Astra 19.2° on Port 1
Hotbird 13.0° on Port 2

I f you need diseqc documentation I will sen you. Thanks

[oMikR0n]

is this diseqc patch helps motor moving with SS2DiSEqC by MiBi 1.10 ?

[jerryt]

SS2Diseqc is not using BDA drivers.

[phil06]

I don't understand. I changed my lnb and I reinstall dvbdream. I was able to get all the channels on each transponders astra and hotbird and watch tv on astra and hotbird. I closed dvbdream and I open it again I can only watch on hotbird no signal on astra. Can you explain me thanks

[oMikR0n]

SS2Diseqc is not using BDA drivers.

Do you know if its possible to move my motor with ss2 hd card and how?

[rel]

SS2Diseqc is not using BDA drivers.

Do you know if its possible to move my motor with ss2 hd card and how?

not possible, please check the supported devices list first before posting any question.

[hany_msaad]

1st i`m so glad to be in this community
2nd i have kworld dvb s 100 and i can`t get diseq to work
tell me how to do it and where i can find the card documentation to send it for u
thaaaaaanx