DvbDream Community

Anyone got this to work with the Digiwave 103G yet?

I have a 103G, it work very well. The only problem I have is the switching between Satellites. I hope I could fix this problem soon. DvbDream is one of the best programs I've used so far.

Can you share the drivers of your card and your setup please since I couldn't get this to work...

I have a 103G, it work very well. The only problem I have is the switching between Satellites. I hope I could fix this problem soon. DvbDream is one of the best programs I've used so far.

This is what I did so far. First I installed the nVidia Purevideo drivers. If you don't have nVidia drivers just install Cyberlink powerdvd 7(shareware is fine). Second I installed My Theatre (use shareware version and please donate the money to DvbDream instead, its way better). Make sure Everything works with My Theatre first. Third install Dvb Dream with all the default settings. Start Dvb Dream click options, device BDA Satellite start and ok. Please keep in mind that dvbdream or the 103G will not! power up the lnb, so whatever satellite you scaned last with My Theater is the one you are going to scan with DvbDream. I have tested three sats and DD worked, but for now you have to use My Theatre to power the lnb.

Please keep in mind that dvbdream or the 103G will not! power up the lnb...

You can use the Twinhan BDAConsole application to turn on power (and other settings) at boot time.

I dont know this DVB-Device... if it provides an BDA-Driver ( ! not WDM ) you can try this driver here:
http://www.dvbdream.org/forum/viewtopic.php?t=1060
DiSEqC works with some / many cards and boxes - but unfortunately not with every.... Please try

ScanMan

Maybe Rel can help?