Page 1 of 1
change audio pid = no sound in LAN Broadcasting
Posted: Fri Oct 19, 2007 6:00 pm
by arwa
hello
i use vlc to recive the LAN Broadcasting stream
when i change channel audio pid i get no audio in vlc
can u plz help me
thanks
Posted: Sat Oct 20, 2007 12:45 pm
by FredB
I presume that this only happens on encrypted channels when you change audio stream in VLC.
The only audio stream that is decrypted is the one that is selected in DD.
Posted: Sat Oct 20, 2007 10:02 pm
by arwa
thanks for reply
but the sound work in DD not in vlc
also when i used MT it work fine with av plugin
but MT make the load 80% with this plugin
sorry im newbie at this stuff
Posted: Wed Oct 24, 2007 6:52 am
by FredB
You're right this happens also on FTA channels !!!
Very strange, it the first time I notice this behavior... I haven't encountered such issue on FTA channels during previous tests I've made some time ago.
I'll make further tests with previous releases of VLC.
Posted: Fri Oct 26, 2007 7:50 am
by happyhammer
New to DD but i also have this problem. i have english as my preferred language in DD and this is often the second language option for the channels i want to watch. I can record the channel and then play it in VLC which shows just one audio stream, but when i try to stream to VLC no sound and VLC typically,as an example, shows stream0=video, stream1=spanish,steam 2=english.
It looks like whenever there is a multilanguage audio option, you can only stream the first audio stream.
Could it be a bug in DD streaming? or is there some settings in VLC to rectify?
Posted: Fri Oct 26, 2007 10:16 am
by rel
there was probably a bug in v1.3c
in the upcoming v1.4 , if you switch audio pid, you must pick the right pid on the streaming client too. (for example, you must select the right audio track on the VLC), just tested.
if you need all audio pids to be streamed , please add a feature request.
Posted: Fri Oct 26, 2007 3:43 pm
by arwa
thanks
Posted: Fri Oct 26, 2007 6:29 pm
by hema-star
Hi all,
I have the suloation Arwa,ok folow this steps in Vlc:
1)after you get the channel on VLC .
2)form Vlc ___ Audio____Audio track____ then choose the languge you play on DD
if you streaming more than channel has multilanguge you have to Delete first the PID Languge you don't need first from the channel properites then do the same step 2
best wishes
Posted: Tue Oct 30, 2007 1:19 pm
by arwa
there was probably a bug in v1.3c
in the upcoming v1.4 , if you switch audio pid, you must pick the right pid on the streaming client too. (for example, you must select the right audio track on the VLC), just tested.
if you need all audio pids to be streamed , please add a feature request.
how i can select the audio track on the vlc ?
Posted: Tue Oct 30, 2007 1:24 pm
by arwa
find it
thanks work fine
Posted: Sun Nov 11, 2007 4:42 pm
by arwa
hi
thanks for the new ver
in ver 1.4c , 1.4d
when i start stream from vlc it return to the default audio pid .. english
dd -> audio pid -> renderless mode "or vlc -> file -> open network -> change to my audio track "
when i try to transcoding it return to the first pid .. and we don't have sound
when i used 1.3 it work perfectly