Page 1 of 1
Kworld DVB-S 100 supported?
Posted: Mon Dec 03, 2007 12:10 pm
by miro
I have BDA driver for KWORLD dvb-s 100 card, but I can't watch SATTV with Dvbdream.
Is it possible or will be possible to watch in the near future?
Posted: Mon Dec 03, 2007 12:23 pm
by GrEaTwArRiOr
hi mate look here
http://www.dvbdream.org/supported_devices.php
these are supported cards right now
i hope this info is enough suppose if your card is worked and it is not on the list you can contact
reland tell the card name add to the current list
regards,
Gr
Posted: Tue Dec 04, 2007 2:27 pm
by miro
Yes, there is one Kworld, but not DVB-S 100.
Posted: Thu Dec 06, 2007 3:25 pm
by djpaul1963
KWorld DVB-S 100 works fine with DVB Dream.
I have installed the drivers released on 29/06/2007 just for some minor fixes.
The driver on the original cd worked fine as well.
Native BDA and scanman's BDA_ALL drivers, work both with scanman's driver having less problems on freezes or crashes (very rare even with native version).
It seems you have a driver installation problem. Try to uninstall everything and start all over. Have a look on K-World's forum also for people having similar hardware with yours.
Regards,
Paul
Posted: Fri Dec 07, 2007 6:54 am
by miro
KWorld DVB-S 100 works fine with DVB Dream.
I have installed the drivers released on 29/06/2007 just for some minor fixes.
The driver on the original cd worked fine as well.
Native BDA and scanman's BDA_ALL drivers, work both with scanman's driver having less problems on freezes or crashes (very rare even with native version).
It seems you have a driver installation problem. Try to uninstall everything and start all over. Have a look on K-World's forum also for people having similar hardware with yours.
Regards,
Paul
LOL That's impossible. Are we talk about the same card?
Newset driver for card comes as a exe application and obviously they are very bad created.
If Kworld DVB-S 100 is supoported by dvbdream, why she's not listed under supported devices?!
Posted: Sat Dec 08, 2007 4:22 am
by miro
Alright, I missed something, there is option to set more then one BDA cards, on the first number I had DVB-T card , after I changed to 2, there was Digigo BDA driver.
Now, I have picture and signal on both dvbdream versions 1.4e and 1,3c .
But picture is not running correct, it brakes and after few minutes, dvbdream crashes.
Posted: Sat Dec 08, 2007 8:12 am
by GrEaTwArRiOr
yes, if you are using v1.4e...
there is unidentified error occur in this version even Mr. rel also couldn't identify the real problem
actually thats not true
Mr rel is little busy at the moment
thats da** true
i suggest to you better use v1.4d or v1.3c
regards,
Gr
1.4e
Posted: Sat Dec 08, 2007 2:14 pm
by djpaul1963
well, for me, 1.4e works better than the previous.
try the scanman's bda_all 1.07 driver to see what happens.
also, use nvidia's mpeg2 codecs. before 1.4e they had big problems but now dvbdream is stable (at least for me)
Posted: Sat Dec 08, 2007 2:25 pm
by rel
and the following v1.4e patch might save life
http://www.dvbdream.org/forum/viewtopic ... highlight=
@GrEaTwArRiOr, you ill tempered robot, bender
Posted: Sun Dec 09, 2007 5:54 am
by miro
Thank you, I will better wait until DVBDREAM confirm that KWORLD DVB-S 100 card is supported.
Supported means there will no be necessary to manually install patches to be able to watch tv.
Picture is most important, if it's not good, it's not OK.