suisse hd, how to see that?

General discussion . (Do not post bug reports or feature requests in this section!)

Moderators: Dreamer, FredB, X05

hanzo
Just can't stay away
Posts: 23
Joined: Thu Dec 13, 2007 2:15 am

suisse hd, how to see that?

Postby hanzo » Fri Jan 04, 2008 8:01 am

using dvbdream 1.4h, i tried to watch "suisse hd", but i see only flying lines.. i can hear audio correctly..
i wanted to try some hd channel and that one was one i could try with.. i can see non-hd channels without problems.
codecs i'm using:

Video Codec.....: CyberLink (New) (v6.0.0.238 - 02/11/2004)
Audio Codec.....: CyberLink (v3.5.0.236 - 04/10/2001)
H264 Codec......: CoreAVC (v1.3.0.0 - 20/03/2007)
Video Renderer..: Video Mixing Renderer 9
Audio Renderer..: Default DirectSound Device

Is ss2 not able to show the hd channel?
thanks

Skystar2 4.4.1
mudo453
Just popping in
Posts: 9
Joined: Tue Jan 09, 2007 4:48 pm

Postby mudo453 » Fri Jan 04, 2008 9:47 am

hanzo try core avc 1.6 :lol:
WinXp sp3
Skystar 2.6d : driver 4.5.0
hanzo
Just can't stay away
Posts: 23
Joined: Thu Dec 13, 2007 2:15 am

Postby hanzo » Fri Jan 04, 2008 10:23 am

thanks for reply.
i installed 1.6 and i can see images
but every second it freeze for a second and then start and so on..
and the red bar get filled fast..
where is the bottleneck?
ss2? my p4 3.0ghz? my ati 9550 256mb? my 1gb ram?
thanks.

codecs now are:

Video Codec.....: CyberLink (New) (v6.0.0.238 - 02/11/2004)
Audio Codec.....: CyberLink (v3.5.0.236 - 04/10/2001)
H264 Codec......: CoreAVC (v1.6.0.0 - 29/10/2007)
Video Renderer..: Video Mixing Renderer 9
Audio Renderer..: Default DirectSound Device

(why when i open video option the codec are red?)
Skystar2 4.4.1
saentist
love DVB Dream!
Posts: 114
Joined: Tue Aug 28, 2007 3:02 pm
Location: Bulgaria
Contact:

Postby saentist » Fri Jan 04, 2008 3:25 pm

are u try with
Video Mixing Renderer 7
in core set
deinterlacing to Hardware
turn off aggreive deintarlacing
and set YVY2 to be on top

also Elecard AVC/h264 i thing is beter

www.free-codecs.com
Image
Pinnacle PCTV-SAT, Twinhan VP1030 CI (yellow) & DVB-T MobiDTV Pro
Sappire X1950Pro 512Mb DDR3 256bit (AGP)
140 cm parabola with inverto 0.3dB SRT-V50 30E<->57W
Image
hanzo
Just can't stay away
Posts: 23
Joined: Thu Dec 13, 2007 2:15 am

Postby hanzo » Fri Jan 04, 2008 4:09 pm

are u try with
Video Mixing Renderer 7
in core set
deinterlacing to Hardware
turn off aggreive deintarlacing
and set YVY2 to be on top

also Elecard AVC/h264 i thing is beter

www.free-codecs.com
best i can get is on this conf:

Video Codec.....: Elecard 3.x (v1.0.215.205 - 03/04/2007)
Audio Codec.....: Nero (v3.2.0.20 - 25/07/2005)
H264 Codec......: CoreAVC (v1.6.0.0 - 29/10/2007)
Video Renderer..: Video Mixing Renderer
Audio Renderer..: Default DirectSound Device

and i set what you said in core...

but it still skips a bit and buffer grow.. and other applications freezes since dvbdream take all the cpu i guess..

I can't find elecard avc/h264.. where can i find excatly? thanks
Skystar2 4.4.1
hanzo
Just can't stay away
Posts: 23
Joined: Thu Dec 13, 2007 2:15 am

Postby hanzo » Fri Jan 04, 2008 5:24 pm

i tried with this configuration too:

Video Codec.....: CyberLink (New) (v8.1.0.2 - 14/11/2007)
Audio Codec.....: CyberLink (New) (v6.1.0.93 - 14/11/2007)
H264 Codec......: CyberLink (PDVD7.x) (v2.1.0.84 - 14/11/2007)
Video Renderer..: Video Mixing Renderer 9
Audio Renderer..: Default DirectSound Device

and the result is quite the same as above..

anyway, why when i go to an hd channel, like suisse hd, when i go to video options, the audio codec:
Audio Codec.....: CyberLink (New) (v6.1.0.93 - 14/11/2007)
is red? while when i'm on a normal channel it's not red?

the only audio codec that doesn't become red when i see an hd channel is:
Audio Codec.....: Nero (v3.2.0.20 - 25/07/2005)

does it make any sense?
Skystar2 4.4.1
Snuffer
love DVB Dream!
Posts: 121
Joined: Fri Jun 16, 2006 9:44 pm

Postby Snuffer » Sat Jan 05, 2008 2:52 am

I have best results with Bitcontrol also 4:2:2
hanzo
Just can't stay away
Posts: 23
Joined: Thu Dec 13, 2007 2:15 am

Postby hanzo » Sat Jan 05, 2008 3:16 am

with both cyberlink and coreAVC cpu runs at 100% :(
Skystar2 4.4.1

Return to “General”

Who is online

Users browsing this forum: No registered users and 1 guest