Will DVBDream work fine with your DVB card/box ?

General discussion . (Do not post bug reports or feature requests in this section!)

Moderators: Dreamer, FredB, X05

User avatar
rel
relocation
Posts: 2051
Joined: Fri Jun 16, 2006 9:50 am

Will DVBDream work fine with your DVB card/box ?

Postby rel » Thu Jan 10, 2008 2:07 am

Make sure you have one of the tested cards, if you need diseqc or motor support , also make sure it is specifed that your card has raw diseqc support on its DD interface, then DD should work nicely.
http://www.dvbdream.org/supported_devices.php



WDM drivers will work better than BDA for Twinhan and SS2.

So WDM drivers are recommended for B2C2 PCI/USB(SkyStar2, AirStar, CableStar) and Twinhan PCI (vp1020, vp1030..) models instead of BDA driver.
SkyStar2 will need Mibi's patched WDM drivers to be able to command diseqc switches and motors.
For Twinhan's Starbox and DVB-S2 models, ScanMan's BDA_ALLdriver is recommended.

BDA DVB-S devices : It needs device specific codes for Diseqc an CI support since BDA specification doesnt support diseqc and CI. Some of device specific diseqc are implemented and some might be implemented in next versions. If you have any information on how to implement Diseqc support on your BDA device , please let me know. We will try to implement necessary code in DD.



Twinhan:
It won't work good on Twinhan Starbox and their other new models, you could have a lot of problem. (You should give a try to ScanMan's alternative BDA_ALL device interface, you can find it on DD forum, people say it works nice with StarBox)

The versions which have neen tested with "BDA Native" DD interface
- 1020a
- 1030a
- 102g (according to user reports)
- 1022a (according to user reports)
- 1025 (according to user reports)
To fix the issues with other twinhan devices some documentation(maybe SDK) or the device itself would be required to test with.

DVB Dream - because I have to dream about having time to code it
smarg
Just can't stay away
Posts: 35
Joined: Tue Apr 17, 2007 12:52 pm

Postby smarg » Thu Jan 10, 2008 5:58 am

Hi,

I can confirm that my SS2 works fine with Diseqc WITHOUT patched drivers. I had problems in the past due to cheap, low quality diseq device. Since i switched it to better one i have no problem switching diseq reliably.

Still, I have couple of stability issues (see my other posts), but not too often.

Although the issues, DD is the most stable of all i tried. Too bad it misses couple of keypoint features (like DVB subtitles).

Thanks.
DFI RS482 Mobo - AMD 3200 Venice core - SS2 2.6B - Vista Ultimate 32bit - DD 1.3c
WMTL
Posts: 1
Joined: Tue Feb 05, 2008 12:08 pm

Postby WMTL » Wed Feb 06, 2008 12:18 pm

which diseqc are you using?
Probably Hauppauge Nova
CapVi
Just popping in
Posts: 7
Joined: Tue Feb 19, 2008 8:20 am

Pinnacle 72e WORKS PERFECTLY!!!

Postby CapVi » Fri Feb 22, 2008 6:06 am

Thanks for all, your programme works perfectly with Pinnacle Stick 72e also as recorder!
Could you add to tv list support device?
Thanks
Pinnacle 72e Stick Ultimate DVB-T
Pinnacle TV center Pro 4.94
MB:P5NE-Sli , CPU:E6300 , RAM:Elixir DDRII 800Mhz 1GByte, SK VIDEO:Asus EN8600GT SILENT/HTDP/256MB
Windows XP SP2
Notebook Sony FZ11Z with Vista Premium
Iwanttolearn
Posts: 1
Joined: Fri Mar 14, 2008 7:18 pm

Postby Iwanttolearn » Fri Mar 14, 2008 7:22 pm

Were do I get the newest WDM driver? Twinhan website only gives the BDA drivers. Once I get this driver anyone show me a link to a POST to get a DP twin to switch with a 1020a?
Twinhan 1020a bda(1.2.2.8)
sateye
Posts: 2
Joined: Wed Mar 26, 2008 5:32 am

Postby sateye » Sat Mar 29, 2008 12:30 pm

Hi

It is my Firs post so .. THANKS FOR THE GREAT PROGRAM
:) :) :)
I can confirm that my tbs DVB-S2 8920 is working fine without any patch with the new driver supplied by the manufacturer (http://www.tbsdtv.com/download/S8920/8920driver.rar)

with 7 LNB's connected to uncommitted disecq

My TT-s2 3600 USB is not able to do that - maybe a driver problem.
TSB 9820 S2 PCI BDA Driver
TT-S2 3600 USB2 BDA Driver
1.2 M Dish 7LNB's 7W;4W;5E;7E;13E;16E;26E
Uncommitted Disecq ROC GD-81A
vdtkps
Posts: 1
Joined: Mon Oct 13, 2008 11:18 pm
Location: Kaunas, Lithuania

Postby vdtkps » Tue Oct 14, 2008 2:05 am

I have a Kathrein UHF910 working in my sitting room, but I also purchased my Hauppauge Nova HD S2 recently.
I've been trying various DVB soft. No one had all working features that I wanted. Then I downloaded DD and...

-within seconds I had "Das Erste"
-within minutes I had "Astra HD+"
-next day I downloaded new BDA, now I have Diseqc1.0 for 4 satellites
-vPlug2.3.7 is working like a charm, after I fed it the right stuff ;)
-from what I see DDv1.4i looks quite stable
-and on the top of it- DD is freeware

It is absolutely fantastic!

What I need more is perhaps Diseqc1.1, but I think I'll figure it out reading this site (if my Nova can send raw commands at all, of course).
Another thing is, I'm afraid, more complicated- how to convince my "ATI Radeon HD 2600 pro" hardware to take over some work from the
good old Athlon2.2GHz CPU I am using for the time.
I think the right codec configuration should help here.
I have a lot of codecs on my XP system, but I see only four of them in the Options>Video>AutoGraph>H.264codec dialog box.
Even if I built a graph with the GraphEdit- I don't find in menus any way how to use it.
I would appreciate any hints or links.

And for all those who made this DD project possible-

GREAT JOB, THANK YOU!
Hauppauge Nova HD S2, ATI Radeon HD 2600 pro, 19.2°E/28.2°E/13.0°E/0.8°W, Diseqc1.1, DD1.4i
krishn
Just popping in
Posts: 4
Joined: Mon Mar 02, 2009 9:06 am

skystar hd2 and dvbdream working

Postby krishn » Sat Mar 07, 2009 10:30 am

I have just purchased new technisat skystar hd2 dvb s2 card.

this card is not listed in supported device list but I am able to scan channel.

does it mean that my card will work completely with dvbdream? I have just installed vpl** latest and em**ation latest but I dont know how to configure so channel are blank. i can click and see epg.

thanks
Thanks :-)

Technisat Skystar HD2
No diseqc
dual LNB Ku
60cm Ku Dish
Win XP Pro SP3
User avatar
Rockin' Rick
Home away from home
Posts: 64
Joined: Mon Jun 19, 2006 9:50 am
Location: At the keyboard

Postby Rockin' Rick » Sun Oct 18, 2009 6:57 pm

Has anyone verified that the TBS DVB-S2 8920 does indeed support 8PSK in DVBDream? The chart doesn't indicate this. Card specs indicate it supports 8PSK.
Is this card not identical to the Prof DVB-S2 7300? This indicates 8PSK works on the compatibility chart.
Anyone tried the PCI-E version TBS DVB-S2 6920 ?
Twinahn 1020A, WinXP Pro, Dual Athlon 1800, 3 meter C/Ku dish and toroidal Ku dish.
ab8yy
Posts: 1
Joined: Thu May 13, 2010 8:27 am

TeVii S464 Card support?

Postby ab8yy » Thu May 13, 2010 8:31 am

In several places online, it is said that DVBDream supports my PCI card, but when I run it - as soon as I start the card, DVBDream shuts down. Is this a problem with the driver or is this a problem with the codecs? In other software, bad codecs will cause this action, but generally when the program starts, not while starting the PCI card.

Also, does the software support Matchbox Pro in some way as I have never been able to get it to run properly with that USB device in the past.

Thanks for any replies on this.

Steve
TeVii S464 PCI - 10 Foot C and 31 inch Ku dishes
Matchbox Pro USB
Windows XP - 2 Ghz CPU with 256 MB RAM
NVidea Video Card
TeliaSonera
Just popping in
Posts: 5
Joined: Sun Sep 26, 2010 7:05 am

Postby TeliaSonera » Tue Sep 28, 2010 8:25 am

* No signal on DVB-S2 channels :?
SkyStar USB 2 HD CI
sean99
Just popping in
Posts: 6
Joined: Mon Oct 04, 2010 6:02 am

Postby sean99 » Tue Oct 05, 2010 2:02 pm

My card is Sky Star 2 TV and DVBDream works TERRIBLE with it.
DVB card: Sky Star 2 TV - Technisat, software version: 4.6.0,
VGA: Nvidia 7600 GS
OS: XP-sp3
Satellites: HotBird, Badr, Turksat
pacobar
Not too shy to talk
Posts: 11
Joined: Wed Sep 20, 2006 1:18 am

New skystar USB HD (no CI)

Postby pacobar » Wed Oct 06, 2010 2:21 am

New skystar USB2 HD (no CI)

Will this card work with dvbdream on WDM driver?
sean99
Just popping in
Posts: 6
Joined: Mon Oct 04, 2010 6:02 am

Postby sean99 » Wed Oct 06, 2010 7:07 am

Maybe But Sky star 2 TV works auful
DVB card: Sky Star 2 TV - Technisat, software version: 4.6.0,
VGA: Nvidia 7600 GS
OS: XP-sp3
Satellites: HotBird, Badr, Turksat
amer1
Not too shy to talk
Posts: 10
Joined: Fri Jan 21, 2011 8:15 am

Please I want to BDA card AzureWave TWINHAN AD-SP 410

Postby amer1 » Fri Jan 21, 2011 9:02 am

Please I want to BDA card AzureWave TWINHAN AD-SP 410
TWINHAN AD-SP410

Return to “General”

Who is online

Users browsing this forum: No registered users and 1 guest