DvbDream Community

What are the correct settings for the DP LNB in DVBDREAM?

I have tried many settings.

I believe the correct settings (from what I have read) are:

Mini Diseqc

port #1 echo 7

Dishpro KU-HI(DBS)
Raw Diseqc (blank)
22KHz (off)
Uncommitted (disabled)

Port #2 Echo 8,10

Dishpro KU-HI(DBS)
Raw Diseqc (blank)
22KHz (off)
Uncommitted (disabled)

There are many ideas that people have but I have not gotton any to work. The Dishpro swiches between 110 & 119 just fine in MyTheater.

The driver for the skystar 2 that I am running is "4.4.00.Standard with DiSEqC1.2 and MultiDevice" from the MyTheater drivers folder.

Any help would be appreciated.

I think switch type is wrong in that setup, you must pick "diseqc 1.0 or 2.0" instead of "mini diseqc"

I think switch type is wrong in that setup, you must pick "diseqc 1.0 or 2.0" instead of "mini diseqc"

That was exactly the problem. Thanks for the help.

Works like a charm.