Page 1 of 1
Praying for Mantis Driver...
Posted: Thu Mar 20, 2008 9:40 pm
by mr_kite
I had this Mantis working perfectly with Disqec and all but I can't remember which bda driver I used. Does anyone have a working Mantis BDA or Driver or know which one to use? I'm trying them all one by one but no luck so far.
How I did it
Posted: Fri Mar 21, 2008 1:13 am
by mr_kite
re-installed mantis driver with this one: Mantis v1.1.0.300 use the one with no HID then set DD to use regular BDA and now Disqec works fine!
Posted: Fri Mar 21, 2008 8:07 am
by CausticSoda
Why are you using a mantis driver with a 1027 card? I didn't think the 1027 was mantis.
Posted: Sat Mar 22, 2008 3:40 am
by ScanMan
Mantis is not Mantis !?
Several poeple reported problems with the new Technisat HD2 (NOT 2-HD !). The card looks like a TwinHan 1041 / AD-SP400 - but it seems to be different !
Mantis-driver for TwinHan (e.g. the 1.1.0.300) will NOT work on that !
Also new Mantis-driver for the TS HD 2 (last 1.1.0.402) will not work on TwinHan !
Posted: Sat Mar 22, 2008 5:37 am
by ubinici
Hello Scanman, technisat hd2 (with its original driver) is working with dvbdream (with your latest BDA_ALL interface. DiSEqCMode=1 (default is 3) in BDA_ALL.ini file, thanks to atutus for this info). I scanned turksat, hotbird, astra 19.2 satellites with dvbdream.