Frequent signal loss
Posted: Tue Apr 08, 2008 7:49 am
Hi
This is my first post.
I'm a new user of DD for DVB-S ... and it's a great tool
I have a SS2 with drivers 4.4.1, and a dish with a Monoblock-LNB hotbird+astra.
I'm experiencing strange behaviour of TT :
- I scanned channels on both sats ... all is OK
- Most of the time, all is OK ; For example I switch on several FTA channels and all is ok (signal strength > 75% and quality >90%)
- But some time, I don't know why, when I switch on a channel (that worked before) I have no signal at all (=0) ; then, if I go on other channels, same thing : no signal ... I have to insist several times, or to double-triplecliclk on a channel to get signal back
Have you an idea of what could be wrong on my system ?... dish configuration (do I have to change parameters on disecq because of my Monoblock-LNB hotbird/astra ?...) ? power weak ?....
Thx for your help (and sorry for my bad english)
This is my first post.
I'm a new user of DD for DVB-S ... and it's a great tool
I have a SS2 with drivers 4.4.1, and a dish with a Monoblock-LNB hotbird+astra.
I'm experiencing strange behaviour of TT :
- I scanned channels on both sats ... all is OK
- Most of the time, all is OK ; For example I switch on several FTA channels and all is ok (signal strength > 75% and quality >90%)
- But some time, I don't know why, when I switch on a channel (that worked before) I have no signal at all (=0) ; then, if I go on other channels, same thing : no signal ... I have to insist several times, or to double-triplecliclk on a channel to get signal back
Have you an idea of what could be wrong on my system ?... dish configuration (do I have to change parameters on disecq because of my Monoblock-LNB hotbird/astra ?...) ? power weak ?....
Thx for your help (and sorry for my bad english)