Page 1 of 2
CAN'T SWITCH FROM ASTRA TO HOTBIRD
Posted: Sun Jun 29, 2008 3:17 am
by adi32
I have 2 LNB hotbird astra
and when i am in a channel of astra i cant see channels of hotbird
when i open dvbviewer i can see a channel of hotbird
and then when i open DVB DREAM i cn see only channels of hotbird
can you tell me the settings for Diseqc ?
Posted: Sun Jun 29, 2008 4:53 pm
by saentist
set DiseqC from dropdown menu
then all will work
in your picture you add both lnb's in "monoblock"
Posted: Mon Jun 30, 2008 10:33 pm
by adi32
unfortunately it didnt work
Posted: Tue Jul 01, 2008 2:36 am
by saentist
set is as on picture
change if connected on other port
Posted: Tue Jul 01, 2008 10:34 am
by adi32
not worked again
Posted: Tue Jul 01, 2008 11:09 am
by saentist
monoblock or DiseqC swich
explain more
coz мy crystal ball was broken in the chemical cleaning
Posted: Tue Jul 01, 2008 1:46 pm
by adi32
sorry i have DiseqC swich
in progdvb works ok like this
Posted: Tue Jul 01, 2008 2:33 pm
by genpix
sorry i have DiseqC swich
in progdvb works ok like this
Diseqc and Mini-Diseqc are
different switches.
Don't you see that ProgDvb uses different settings for Diseqc and Mini-Diseqc ?
they use different command format.
Sure, diseqc commands would not work for your switch.
Now you should know well, that you have to ask your question correctly if you want to get working answer
select Mini-diseqc from the drop down menu.
Posted: Tue Jul 01, 2008 10:53 pm
by adi32
i have tried Mini-diseqc and also all the possible combinations with no result
is it possible the problem to be owed from the devices plugin?
where can i find a file device for HAUPPAUGE WINTV HVR-4000?
thank you
Posted: Wed Jul 02, 2008 12:20 am
by genpix
i have tried Mini-diseqc and also all the possible combinations with no result
show how you connected sats.
Hope, you connected them on different ports.
Posted: Wed Jul 02, 2008 8:23 am
by adi32
like this
and i have tried all the possible ways
Posted: Wed Jul 02, 2008 10:20 am
by genpix
BDA driver standard does NOT include specifications for diseqc control.
Thus, Diseqc calls have to be done some special way (if you use BDA driver).
And this special way is different from vendor to vendor (cause there is no standard for that).
Looks like your card is not in the
list of cards with known-way-how-to-call-diseqc-function:
Posted: Wed Jul 02, 2008 10:46 am
by adi32
yes i m using BDA driver
so what can i do ?
this
http://www.dvbdream.org/forum/viewtopic.php?t=1708
can help me?
thank you again
Posted: Wed Jul 02, 2008 11:58 am
by adi32
Posted: Wed Jul 02, 2008 12:47 pm
by genpix
combination of diseqc and RAW diseqc commands in your last picture does not make sense.
cause you are sending contradicting commands.
better read more about "E0 10 38 Fx"