Page 1 of 1
ThecnoTrend Budget 3200 S2 (TT-3200)
Posted: Mon Jul 07, 2008 6:37 am
by BudMan
Hello
Has anyone got there Technotrend 3200 to work on S2 8PSK, turbo 8PSK or any other modes besides the standard S mode MPeg2? There is an increase of S2 news feeds on various satellites I would like to monitor. I have the companies Frequencies, Symbol and FEC which this card should work with according to the Technotrend specs. These are clients of a company that I work with. This is not being used for DN. Also apparently this card is supposed to see analog feeds too with a special driver. Can't see how though, but you never know.
Any help would be greatly appreciated since if I can get this to work I will be purchasing more cards. If there is a better S2 card that is known to work with DD please let me know.
Thank You
Posted: Mon Oct 06, 2008 8:11 am
by BxS
I have a TT S2-3200 for some time, but only now I'm having time to play with it.
For what I can tell, it support only QPSK (DVB-S) and 8PSK (DVB-S2), here a image of the card tuning a 8PSK transponder
It also control my disqec v1.2 motor without problem
Posted: Tue Oct 07, 2008 7:37 am
by oMikR0n
It also control my disqec v1.2 motor without problem
With which plugin ? Please explain. Are you on vista? x64?
Posted: Tue Oct 07, 2008 2:08 pm
by BxS
It also control my disqec v1.2 motor without problem
With which plugin ? Please explain. Are you on vista? x64?
Hi,
Look at my signature:
Code: Select all
SkyStar2 r2.6B driver v4.4.1 | SG-2100 Motor (SG2100B SEP-9-02) | Dish: 1m LNB: 0.6dB | Desktop: WinXP SP3 | Notebook: Vista x64 SP1 (SS2 by wireless)
Technotrend S2-3200 WDM driver v2.5.1.0 | SG-2100A Motor | Dish: 85cm LNB: 0.2dB | Desktop: WinXP SP3
I use my TT S2-3200 in my desktop, that have a 32bits OS (WinXP SP3), I only have Vista X64 SP1 at my Notebook.
I also use the WDM driver, not the BDA, I try to avoid the BDA stuff.
And, for drive the motor, no plugin is needed, I only use a devicefile, that I made to add support of TT S2-3200 (WDM) to DVBDream, this devicefile was programmed to support Diseqc v1.2 to drive my motor
Posted: Tue Oct 07, 2008 8:32 pm
by oMikR0n
can you give me this plugin please? I have the same motor. Do you know if i ll have problems on vista x64?
Posted: Wed Oct 08, 2008 5:19 am
by BxS
No plugin is needed, only a devicefile that use the WDM driver, the WDM driver:
Code: Select all
WDM Software + Driver (nur Datendienste)
* Version 2.19h (28.11.2006) for Win98/ME/2000/XPTM (21,8 MB)
don't support Windows Vista.
Posted: Wed Oct 08, 2008 10:55 am
by oMikR0n
ok thank you so much
Posted: Thu Oct 09, 2008 2:25 pm
by gertschi
@BxS
Please would you place your BxS-TT S2-3200 WDM device-interface at this forum.
I know there are many DD-users waiting for such dev. because the bda.dev (just now) isn't useable for diseqc v1.2
Posted: Fri Oct 10, 2008 11:39 am
by BxS
@BxS
Please would you place your BxS-TT S2-3200 WDM device-interface at this forum.
I know there are many DD-users waiting for such dev. because the bda.dev (just now) isn't useable for diseqc v1.2
Ok, if you think that it can be useful for DD users, I will put it public today or maybe tomorrow.
EDIT (12/10/2008):
Done, look here:
http://www.dvbdream.org/forum/viewtopic.php?t=2212
Posted: Wed Jan 21, 2009 7:13 am
by oMikR0n
Are there any news for vista x64?