DvbDream Community

I scanned the 5th satellite and all channels and transponders are ok. After exiting the program dhe 5th satellite disapears from the list. The other 4 remain and are fine. Any idea why?

Thanks,

7w 5w 4w 1w 4.8e 7e
without any problem

I scanned the 5th satellite and all channels and transponders are ok. After exiting the program dhe 5th satellite disapears from the list. The other 4 remain and are fine. Any idea why?

Thanks,

Could you post some screen shots, because I don't have any ideas with the little information you have provided.

I am interested in how you configured these satellites and what the 5th satellite shares with the other four? Port? Transponder file?

Sorry for my late reply. Well, not sure what screen shots you are asking but here is my setup. I use Diseqc switch type v1.0 or v2.0. on software setting and use a SAR411 Span 4x1 hardware. I have Echostar 7 on port1 Echostar8.10 and Telestar5 on port2 and Nimiq1 and Nimiq2 on port3. I use 3 spaun 5x8 multiswitches and use tone 0-22k on software to select between two sats in the same diseqc port. Currently I have another SAR411 with same setup connected on 2nd output ports of 5x8 multiswitches connecting a DM7020s receiver that works with no problem on all 5 sats. DVBdream works fine with all 5 of them but like I said once I exit the program and start it back Telestar5 on port2 disapears from the list of satellites. I have to rescan again so I can have its transponders available for viewing.

This is strange and I cannot think of anything as of how to resolve this.

THanks,

I would delete both satellites on that port and add them back.

If that does not work, post in bug reports.

I am able to delete all satellites from the diseqc menu but when I go back to diseqc I see them back. So I am unable to delete any of the satellites from my configuration. I tried to exit out the DVB dream alltogether and launch it back but the satellites remain from the old configuration. I will uninstall it and reinstall it back to see if the behaviour will change.

thanks,

Uninstalling and re-installing DVB dream resolved the issue. Now The 5 satellites are fine.

Thanks for your help,