DvbDream Community

Posted: **Tue Jul 22, 2008 9:34 pm**

22kHz OFF uncomited disabled
Lnb1 E0 10 38 F0
Lnb2 E0 10 38 F4
Lnb3 E0 10 38 F8
Lnb4 E0 10 38 FC
DiseqC connected to 22kHz swith 22 OFF port
5th sattelite connected to 22kHz switch ON port nad I need help here with commands. Thanks in advance

Posted: **Wed Jul 23, 2008 3:45 am**

What is your question, you have all the needed information?

Posted: **Wed Jul 23, 2008 9:20 am**

What is your question, you have all the needed information?

Problem is using those raw commands i don`t have any signal ( no problem with DiseqC 1.0/ 2.0 configuration ) . Are those Raw commands correct?

Posted: **Wed Jul 23, 2008 12:15 pm**

Those commands are correct.

For "Raw Commands" you select in diseqc switch "None", then under raw diseqc enter the commands you have.

Most likely you didn't select "none".

DvbDream Community

Please help with DiseqC raw commands

Please help with DiseqC raw commands