BxS - TT S2-3200 WDM for DvbDream v1.1.0 [20/02/2009]
Moderators: Dreamer, FredB, X05
BxS - TT S2-3200 WDM for DvbDream v1.1.0 [20/02/2009]
[20/02/2009] Important: You need to check the [Prevent usage of more than one CPU] option in DVBDream, or this software will not work wheel in multicore CPU's.
----------------------------------------------
- BxS - TT S2-3200 WDM for DvbDream -
----------------------------------------------
This devicefile add support of Technotrend S2-3200 to DvbDream.
Author: BxS
Copyright: (c) 2008 BxS. All rights reserved.
Webpage: http://bxs.no.sapo.pt/index_BxS_TT_S2_3200_DD.htm
#Download:
- v1.1.0:
BxS - TT S2 3200 WDM for DvbDream v1.1.0
or
BxS - TT S2 3200 WDM for DvbDream v1.1.0
- v1.0.0:
BxS - TT S2-3200 WDM for DvbDream
or
BxS - TT S2-3200 WDM for DvbDream
# It support:
- DVB-S2(8PSK) Transponders
- Diseqc Commands that make possible for example control Diseqc Motors.
# Installation:
- It use WDM driver, so if you don't have WDM driver installed, get it and install
it [WDM Software + Driver]:
Version 2.19h (28.11.2006) for Win98/ME/2000/XPTM (21,8 MB)
- Put file [ttlcdacc.dll] in DvbDream directory and file [BxS_TT_S2_3200.dev]
in [DvbDream\Devices] directory,
- Run DvbDream, press Ctrl+D and select [BxS - TT S2-3200 WDM (xx/xx/xxxx)] Device,
if you have more than one card them also select the correct card number,
- And finally, don't forget... Enjoy
# History:
- V1.1.0 (16/10/2008)
Changes in the Transponder lock algo
Redone all the code that handle the Transport Stream
Several bug fixes
- V1.0.0 (12/10/2008)
First public Release.
----------------------------------------------
- BxS - TT S2-3200 WDM for DvbDream -
----------------------------------------------
This devicefile add support of Technotrend S2-3200 to DvbDream.
Author: BxS
Copyright: (c) 2008 BxS. All rights reserved.
Webpage: http://bxs.no.sapo.pt/index_BxS_TT_S2_3200_DD.htm
#Download:
- v1.1.0:
BxS - TT S2 3200 WDM for DvbDream v1.1.0
or
BxS - TT S2 3200 WDM for DvbDream v1.1.0
- v1.0.0:
BxS - TT S2-3200 WDM for DvbDream
or
BxS - TT S2-3200 WDM for DvbDream
# It support:
- DVB-S2(8PSK) Transponders
- Diseqc Commands that make possible for example control Diseqc Motors.
# Installation:
- It use WDM driver, so if you don't have WDM driver installed, get it and install
it [WDM Software + Driver]:
Version 2.19h (28.11.2006) for Win98/ME/2000/XPTM (21,8 MB)
- Put file [ttlcdacc.dll] in DvbDream directory and file [BxS_TT_S2_3200.dev]
in [DvbDream\Devices] directory,
- Run DvbDream, press Ctrl+D and select [BxS - TT S2-3200 WDM (xx/xx/xxxx)] Device,
if you have more than one card them also select the correct card number,
- And finally, don't forget... Enjoy
# History:
- V1.1.0 (16/10/2008)
Changes in the Transponder lock algo
Redone all the code that handle the Transport Stream
Several bug fixes
- V1.0.0 (12/10/2008)
First public Release.
Last edited by BxS on Fri Feb 20, 2009 1:37 pm, edited 5 times in total.
@starman,
@SteveOtoo:
Thanks for your words
I use Win Vista 64bits in my Notebook and like it, but my Desktop just made 6 years , so no plans to put Vista on it (a new desktop will have to wait some time).
But probably the WDM driver don't support Win Vista.
About "HD channels in Europe (+-70E - 4W)", be more precise, what I can tell you is that it support DVB-S2 H264 HD chanels.
@SteveOtoo:
Thanks for your words
I don't have any switch, but good to know that this devicefile solved your problem@BxS
Great job you made!
Your interface allowes me now to use my EMP-Centauri 8/1 switch with more than 4 LNB using DiseqC v1.1 commands!
Thx a lot.
Vista 32bits, hum...Thank you BxS! Is it working also with Windows Vista (32 bit)? What about HD channels in Europe (+-70E - 4W)?
I use Win Vista 64bits in my Notebook and like it, but my Desktop just made 6 years , so no plans to put Vista on it (a new desktop will have to wait some time).
But probably the WDM driver don't support Win Vista.
About "HD channels in Europe (+-70E - 4W)", be more precise, what I can tell you is that it support DVB-S2 H264 HD chanels.
Hmm.. thanks for the info, so I have to wait, or perhaps buy another card (two S2 cards are in the Supported devices list).Vista 32bits, hum...
I use Win Vista 64bits in my Notebook and like it, but my Desktop just made 6 years , so no plans to put Vista on it (a new desktop will have to wait some time).
But probably the WDM driver don't support Win Vista.
Dreamer
Thanks BxS for this awesome device file.
With the TT-budget WDM-Driver the ChannelZapping is sooo much faster, as the original BDA driver.
Diseqc 1.1 works now better and faster for me, too. But i will testing it completely in the next weeks.
THANK YOU
I have only one problem yet. It's a little bit OffTopic but i can't tune the "Kabel Deutschland" DVB-S2 Transponders on 23,5°E all others work fine. Anybody has an idea why only these not working?
With the TT-budget WDM-Driver the ChannelZapping is sooo much faster, as the original BDA driver.
Diseqc 1.1 works now better and faster for me, too. But i will testing it completely in the next weeks.
THANK YOU
I have only one problem yet. It's a little bit OffTopic but i can't tune the "Kabel Deutschland" DVB-S2 Transponders on 23,5°E all others work fine. Anybody has an idea why only these not working?
I'm using a SkyStarHD (TT S2-3200 WDM) with DVBdream on 1 uncommitted and 3 committed Spaun-switches for 11 LNBs (28,2°E - 12,5°W).
Yes, most BDA drivers don't even deserve attention, they are so bad.Thanks BxS for this awesome device file.
With the TT-budget WDM-Driver the ChannelZapping is sooo much faster, as the original BDA driver.
Diseqc 1.1 works now better and faster for me, too. But i will testing it completely in the next weeks.
THANK YOU
If you din't upgrade the transponders list of 23.5E sat, do it first, dowload this ini file 0235.ini and copy it to Transponders directory of DvbDream.I have only one problem yet. It's a little bit OffTopic but i can't tune the "Kabel Deutschland" DVB-S2 Transponders on 23,5°E all others work fine. Anybody has an idea why only these not working?
Try it and report
i've updated the tp-list before and tryed to scan manually with all possible Modulation types. It won't work. Can it be that these TPs have a low signal strengh as the other transponders? Because my LNB is not 100% perfectly aligned.
I'm using a SkyStarHD (TT S2-3200 WDM) with DVBdream on 1 uncommitted and 3 committed Spaun-switches for 11 LNBs (28,2°E - 12,5°W).
i can't tune the "Kabel Deutschland" DVB-S2 Transponders on 23,5°E all others work fine.
Probably, I had problems with DVB-S2 transponders at Hispasat 30ºW, I had to realigned my system to be able to lock the transponders without errors.i've updated the tp-list before and tryed to scan manually with all possible Modulation types. It won't work. Can it be that these TPs have a low signal strengh as the other transponders? Because my LNB is not 100% perfectly aligned.
Thanks BxS, your device file and the WDM driver work well. I can drive the motor correctly but can't seem to change LNB's with a DisEqC 1.2 switch via the port settings or raw DisEqC commands. I'd like to switch to the WDM driver as I'm having difficulty with the BDA driver working correctly for channels with symbol rates less than 5001. Using the BDA API and driver 5.0.0.19, I have no problems with DisEqC calls as long as the symbol rate is 5001 or greater, however, if the symbol rate is less than 5001, the calls don't seem to be honored.
SS2 2.6, TT S2-3200
BxS - TT S2-3200 WDM for DvbDream v1.1.0 is out!
#Download:
- v1.1.0:
BxS - TT S2 3200 WDM for DvbDream v1.1.0
or
BxS - TT S2 3200 WDM for DvbDream v1.1.0
# History:
- V1.1.0 (16/10/2008)
Changes in the Transponder lock algo
Redone all the code that handle the Transport Stream
Several bug fixes
#Download:
- v1.1.0:
BxS - TT S2 3200 WDM for DvbDream v1.1.0
or
BxS - TT S2 3200 WDM for DvbDream v1.1.0
# History:
- V1.1.0 (16/10/2008)
Changes in the Transponder lock algo
Redone all the code that handle the Transport Stream
Several bug fixes
Who is online
Users browsing this forum: No registered users and 1 guest