DvbDream Community

problem with tevii s460 dvbs-2 and diseq with dvbdream 1.4i
windows 7 x64
the problem
with 4 port diseq truman
1=nilesat
2=hotbird
3=arabsat
when search on hotbird find the same channel on nilesat
when search on arabsat find the same channel on nilesat
diseq not work true
but with myTeVii program work good

i had the same problem with my diseqc. I had to disconnect all the cables to the diseqc and just hook 1 up at a time and scan. then hook them all back up. but then you have an all new problem because anytime you change the channel to a diff lnb then you started on then it rarely connects. the only way i have found around this is to change the channel to a diff lnb, then restart the program. for some reason the diseqc commands just dont stick. I have asked for help in these forums but have gotten no where so goodluck.

i had the same problem with my diseqc.

You are wrong.
You have absolutely different problem.

matrix2010 uses a BDA driver which doe snot support diseqc protocol (or at least, generic BDA interface does not know how to call diseqc functions of his driver), that's why his switch is not switching.

You use a driver which works fine and has full diseqc support.
in 95% cases intermittent diseqc switching is due to lack of proper grounding.

i had the same problem with my diseqc.

You are wrong.
You have absolutely different problem.

matrix2010 uses a BDA driver which doe snot support diseqc protocol (or at least, generic BDA interface does not know how to call diseqc functions of his driver), that's why his switch is not switching.

You use a driver which works fine and has full diseqc support.
in 95% cases intermittent diseqc switching is due to lack of proper grounding.

but work good with diseq with
myTeVii
problem in dvbdream

i have sky star 2 with wdm driver and had problem with diseqc but when change the diseqc to old one its working now very good, so try some old diseqc if you have.

Best Wishes.

the diseq is old 4 year