Using a DVB-S and DVB-T card at the sane time?

General discussion . (Do not post bug reports or feature requests in this section!)

Moderators: Dreamer, FredB, X05

Posts: 1
Joined: Sat Oct 22, 2011 4:17 am

Using a DVB-S and DVB-T card at the sane time?

Postby solus » Sat Oct 22, 2011 4:26 am

Hello from a new user.

I an trying to get DVB Dream v1.5g to work with my two installed cards. One card is a Compro Videomate S350 for satellite and the other is a Winfast DTV1000s for terrestial DVB-T.

Both cards work fine with DVB Dream when installed in the machine sepatately. When I install both cards, the drivers are fine and there is n IRQ conflict. However I am sure that both cards are trying to use the BDA device interface.

Is it possible to use this combination? I am running into trouble because I am also running a DISCEQ switch to swap between two lnb's on the same dish.

I fear it may not be possible to do this as both devices are competing for the same device driver?

Many thanks,


Compro Videomate S350
User avatar
Posts: 1214
Joined: Fri Jun 16, 2006 5:46 pm

Postby Dreamer » Thu Oct 27, 2011 1:32 pm

It should work good, at least in the latest version.

Install DD twice, into 2 different folders and setup both separately, then both should work good at the same time. ... 1715#11715

This is the latest version changelog:

- Device dialog now lists the devices of the same interface
love DVB Dream!
Posts: 121
Joined: Fri Jun 16, 2006 9:44 pm

Postby Snuffer » Sat Nov 05, 2011 1:15 am

i have running this setup with a TBS twin tuner card.
Do not forget to set A en B in DD if not you have problems.

Return to “General”

Who is online

Users browsing this forum: No registered users and 1 guest