Page 1 of 1

Config Channels ISDB-T TBS-6814 in DVB Dream

Posted: Thu Feb 15, 2018 11:09 am
by jadsonwelder1980
Hello, I'm new here.
I would like help (step by step) to set up ISDB-T channels on Dream DVB used TBS-6814 receiving cards.
The card is already properly installed and DVB Dream recognizes the card.
My operating system is Windows 10 and use DVB Dream v3.4 Full version.

Thank you!

Re: Config Channels ISDB-T TBS-6814 in DVB Dream

Posted: Thu Feb 15, 2018 11:48 am
by jadsonwelder1980
Attached is the screen with results from DVB Dream.
My country is Brazil.

Tks!

Re: Config Channels ISDB-T TBS-6814 in DVB Dream

Posted: Sat Mar 24, 2018 5:31 pm
by rel
You are on the right track looking at the screenshot you sent,
1) Just make sure you scan the right frequencies (you need to learn what frequencies have broadcasting in your local area , you can then scan them in manual scan or add them into terrestrial.ini)
2) Make sure you get enough signal and you have a good antenna.

DVB Dream is self explenatory, but there are links to tutorials if you really need
http://www.dvbdream.org/main/tutorials

Cross check with an STB to make sure about frequencies & signal levels (antenna configuration)