DvbDream Community

Posted: **Mon Oct 23, 2006 3:03 pm**

If you have 2 DVB cards in 1 PC - SS2+AS2, or SS2+SS2, or other - can you run both cards at once with DVB Dream?

Is this possible?

1. Run DVB Dream twice.

2. Install DVB Dream to 2 folders.

3. Scan DVB-S and DVB-T channels and switch between all channels in one DVB Dream window.

Thanks.

Edit: I've just found Command line switches:

dreamstart.exe /device=2 (select the card, multi card configuration)

So you could please try also this?

Posted: **Tue Oct 24, 2006 6:12 am**

I'm not sure command line option is still working in new DD
but in device dialog through device no box, it must be possible. (first device is "1", second is "2")

I've not tried two B2C2 devices on the same machine. but it should work

Posted: **Tue Oct 24, 2006 10:23 am**

I'm not sure command line option is still working in new DD
but in device dialog through device no box, it must be possible. (first device is "1", second is "2")

I've not tried two B2C2 devices on the same machine. but it should work

Yes, I know it works, but is it needed to change some option (in Technisat software, or DD) everytime you start it, or it works automacically?

If anyone have 2 Technisat cards, could you test it please?

Thanks.